The type 2200 is not available anymore since 3/1/16.

The following types are (can be a little bit different because of the update): 6027

Please contact us regarding a successor product.

Type 2200 - Direct-acting 2/2 way lifting armature valve

The depiction of the products may differ from the actual specific design.

Type Description

The direct-acting valve Type 2200 is delivered with circuit function normally closed. The valve is especially developed for high pressures. The characteristic of the valve construction is the seat design and the sealing element. The conical sealing element allows the switching at high pressures with relative low coil capacity and seal setting.

Push-over solenoid system
Special versions, up to 250 bar, up to DN 2
stainless steel body

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

Can be combined with

Type 1078

Timer Unit

Show full table Collapse table

Applications & Tools

Downloads

Data Sheets

Description	Filesize	Language / Country
Type 2200 data sheet \| feed valve	170 kB	EN / EU
Typ 2200 Datenblatt \| Durchgangsmagnetventil	166 kB	DE / DE
Type 2200 fiche technique \| Électrovanne à plongeur pour hautes pressions	281 kB	FR / FR

User Manuals

Description	Filesize	Language / Country
Additional manual Type 0721 \| Type X, IIC 2G Ex mb or IIC 2G Ex e mb ATEX-approval	584 kB	EN / EU
Additional manual Type XXXX \|PX04 Use in the explosion-hazard area	139 kB	EN,FR,DE / EU
Operating Instructions Type 2200 \| 2/2-way solenoid valve	437 kB	,EN,FR,DE,IT,ES / EU
Manuel supplémentaire Type 0407 \| Type X, IIC 2G Ex mb, IIC2G Ex e mb homologation ATEX	587 kB	DE / FR
Zusatzanleitung Typ 0721 \| Type X, IIC 2G Ex mb bzw. IIC 2GEx e mb ATEX-Zulassung	571 kB	DE / DE

EU Declaration of Conformity

	Description	Filesize	Language / Country
	EU-DoC\|EU Declaration	1 MB	EN,FR,DE