Fitting plastic

Technical attributes

Insertion 2 (inch) | 33,00l/min - 1.333l/min | 0,00 °C - 60,00 °C | PN 10 | Connection clamp | PP (Polypropylene)

Copy values Filter for similar items Select all attributes

Function
Fluidic port connection number 2

Measurand
Measured value unit l/min
Min measured value of volume flow rate 33
Max measured value of volume flow rate 1.333

Process Connection Type/Size
Port connection 1 type Connection clamp
Port connection 1 inner diameter (mm) 63 mm
Port connection material category Plastics
Port connection material PP (Polypropylene)

Materials
Armature material PVC (Polyvinyl chloride)
Measuring pipe material PP (Polypropylene without fibreglass)

Process Pressure / Temperature
Nominal pressure (DIN EN 1333) PN 10
Temperature medium min 0 °C
Temperature medium max 60 °C

Sealing Material
Medium-contacting parts seal material EPDM (Ethylene-propylene-diene rubber)

Orifice size (Kv value)
Diameter measuring tube (DN) 50 mm

Properties
Type 1501
Product sub-group Fitting
Installation length 116 mm

Elektronic
Fitting electronic interface Insertion 2 (inch)

Downloads

Helpful tools & videos

Product specific information

Please enter the serial number stated on the type label: