Bürkert
Insertion magnetic inductive flowmeter
Type 8045 / Ident No. 426507
Product description
The electromagnetic flowmeter 8045 is made up of an electronic module including a backlit display, operating keys and a sensor consisting of PVDF or stainless steel material. It has been designed to measure a flow rate of neutral and slightly aggressive fluids with a conductivity of more than 20 µS/cm in DN06...DN400 pipes. It is equipped with a 4...20 mA output, a digital output (pulse output by default). Some versions are equipped with two relay outputs and one digital input. Two independent totalizers allow counting the flow rate. The available process connections are: - G2” connection for the version with a PVDF sensor - G2” or clamp connection for the version with a stainless steel sensor. The version with a stainless steel sensor can be used in applications with higher pressures (PN16) and higher temperatures (110°C). The version with Alloy C22 electrodes has been designed for applications with aggressive fluids (chemicals) and especially sea water applications.
- EAN Number
- 4053913021699
- Commodity Codes
- 90261021
- Country
- FR
Technical attributes
Name |
Value |
Unit |
|---|---|---|
| Type | 8045 | |
| Product sub-group | Flow rate | |
| Flow rate (volume) | Yes | |
| Concentration | No | |
| Continuous measurement | Yes | |
| Dosing | No | |
| Switch | No | |
| Construction device | Compact | |
| Display type | Display | |
| Protection class measurement device (IP) | IP65 | |
| DC voltage min. | 18 | V |
| DC voltage max. | 36 | V |
| Battery voltage | No | |
| Operating supply type | 3 conductor | |
| Precision of volume flow rate in relation to reading | 0,5 | % |
| Temperature environment min | -10 | °C |
| Temperature environment max | 60 | °C |
| Temperature medium min | 0 | °C |
| Temperature medium max | 80 | °C |
| Nominal pressure (DIN EN 1333) | PN 10 | |
| Dynamic viscosity min. | 0 | cP |
| Dynamic viscosity max. | 2.000 | cP |
| Conductivity min | 20 | µS/cm |
| Detection of flow direction | Yes | |
| Sensor type | Magnetic inductive | |
| Magnetic inductive type | Insertion | |
| Fitting electronic interface | Insertion 2 (inch) | |
| Electrical connection 1 type | Cable gland M20 | |
| Electrical connection 1 quantity | 2 | PCE |
| Electrical connection 1 gender | Terminal block | |
| Electrical connection 1 material category | Plastics | |
| Electrical connection 1 material | PA (Polyamide) | |
| Electrical connection 1 seal material | Neoprene | |
| Input type digital quantity | 1 | PCE |
| Output type analog quantity | 1 | PCE |
| Output analogue current functioning principle source | Yes | |
| Output analogue current functioning principle drain | Yes | |
| Output 1 type analog current | 4-20 mA | |
| Output 1 digital type | Transistor | |
| Output 1 digital transistor connection NPN | Yes | |
| Output 1 digital transistor connection PNP | Yes | |
| Digital output 1 transistor contactless | 0,1 | A |
| Output 2 digital type | Relay | |
| Output 2 digital version NC | No | |
| Output 2 digital version NO | Yes | |
| Output 2 digital relay/reed voltage AC | 250 | V |
| Output 2 digital relay/reed voltage DC | 40 | V |
| Output 2 digital relay/reed power AC | 3 | A |
| Output 2 digital relay/reed power DC | 3 | A |
| Output 3 digital type | Relay | |
| Output 3 digital version NC | No | |
| Output 3 digital version NO | Yes | |
| Output 3 digital relay/reed voltage AC | 250 | V |
| Output 3 digital relay/reed voltage DC | 40 | V |
| Output 3 digital relay/reed power AC | 3 | A |
| Output 3 digital relay/reed power DC | 3 | A |
| Electronics body material category | Plastics | |
| Electronics body material | PC (Polycarbonate) | |
| Cover material | PC (Polycarbonate) | |
| Protection lid material | PC (Polycarbonate) | |
| Nut material | PC (Polycarbonate) | |
| Front foil material category | Plastics | |
| Front foil material | Polyester | |
| Seal sensor/housing material | FKM (Fluor rubber) | |
| Seal housing/cover material | NBR | |
| Protection lid seal material | Silicone | |
| Screw material | Stainless steel | |
| Fastening part material | PSU (Polysulfone) / PPSU (Polyphenylsulfone) | |
| Parametrisation local | Yes | |
| Parametrisation separate | No | |
| Parametrisation fixed | No | |
| Finger material composition | Plastics | |
| Finger material | PVDF (Polyvinylidene fluoride) | |
| Medium-contacting parts seal material | FKM (Fluor rubber) | |
| Electrode material | Stainless steel | |
| Insertion sensor length | long | |
| Time dosing | No | |
| Batch dosing | No | |
| Extended diagnosis | No | |
| Volumeter | Yes | |
| Weight | 0,900000 | kg |
Can be combined with
Applications & Tools
Downloads
Data Sheets
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
Type 8045 data sheet | Insertion electromagnetic flowmeter | 1.5 MB | EN / EU |
|
|
Type 8045 data sheet | electromagnetic Insertion electromagnetic flowmeter [US units] | 527.9 kB | EN / US |
|
|
Type S020 data sheet | Insertion fitting for flow or analytical measurement | 2.1 MB | EN / EU |
|
|
Tipo 8045 folha de dados | aparelho de medição do fluxo magnético-indutivo Insertion | 737.6 kB | PT / BR |
|
|
Tipo 8045 hoja de datos | Insertion ? Caudalímetro magnético inductivo | 298.4 kB | ES / ES |
|
|
Tipo S020 hoja de datos |racor para pH ELEMENT ymedidores de conductividad | 923.1 kB | ES / ES |
|
|
Typ 8045 Datenblatt | magnetisch-induktives Insertion-Durchflussmessgerät | 1.6 MB | DE / DE |
|
|
Typ S020 Datenblatt | Insertion-Fitting für Durchfluss-/Analysemessungen | 2.1 MB | DE / DE |
|
|
Type 8045 fiche technique | Débitmètre Insertion électromagnétique | 1.5 MB | FR / FR |
|
|
Type S020 fiche technique |Raccord Insertion pour les mesures de débit ou d'analyse | 2.1 MB | FR / FR |
User Manuals
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
Operating Instructions Type 8045 | Insertion electromagnetic flowmeter | 817.3 kB | EN / EU |
|
|
Operating Instructions Type S020 | Insertion fitting | 1.6 MB | EN / EU |
|
|
Quickstart Type 8045 | Insertion electromagnetic flowmeter | 474.3 kB | EN / EU |
|
Service manual Type 8045 | Spare parts | 461.6 kB | EN,FR,DE / EU |
|
|
Bedienungsanleitung Typ 8045 | Magnetisch-induktiver Insertion-Durchflussmesser | 822.6 kB | DE / EU |
|
|
Bedienungsanleitung Typ S020 | Insertion Fitting | 1.7 MB | DE / EU |
|
|
Manual de usuario Tipo 8045 | Caudalímetro magnético inductivo | 5.9 MB | ES / ES |
|
|
Manuel d'utilisation Type 8045 | Débitmétre électromagnétique à Insertion | 833.4 kB | FR / EU |
|
|
Manuel utilisateur type S020 | Raccord à insertion | 1.5 MB | FR / EU |
|
|
Quickstart Typ 8045 | Magnetisch-induktiver Insertion-Durchflussmesser | 481.1 kB | DE / EU |
|
|
Quickstart Type 8045 | Débitmétre électromagnétique à Insertion | 477.4 kB | FR / EU |
EU Declaration of Conformity
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 495.7 kB | ML |
Interactive Animation
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
3D-Animation - 8045 | 3.3 MB | DE |
|
|
3D-Animation - 8045 | 3.7 MB | DE |
|
|
3D-Animation - 8045 | 3.3 MB | EN |
|
|
3D-Animation - 8045 | 3.7 MB | EN |
Flyers and Catalogues
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
Electromagnetic Flowmeter Insertion Model. | 632.4 kB | EN / EU |