Share via email
Some fields are missing
Bürkert - Close to you
Office /2
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
 

Cookies must be enabled to use this function. Please accept cookie privacy policy first.

767 Hits

Shut-off Valves (On/Off)

Type 0248

Type 0262
  • Normally closed or open
  • Body material: Brass, Stainless steel
  • Double spindle seal
  • Compact design

Type 0263
  • Normally closed or open in the idle position
  • Body material: Brass, stainless steel
  • Hermetical separation of the medium from the actuator by diaphragm
  • Compact design

Type 0331
  • Direct-acting, media separated valve with diameter of up to DN 4
  • Pilot valve with Bürkert-specific flange design (SFB)
  • Maintenance-free pivoted armature technology
  • Suitable for aggressive alkaline and acidic solutions
  • Service-friendly, robust manual override

Type 1061
  • Combines the functions of a position feedback and a solenoid valve in one
  • Available with 3/2 way, 5/2 way or without solenoid valve
  • ATEX versions available
  • Perfectly suited for pneumatic actuators: 2051 and 2052
  • Adjustable bracket allows the combination with actuators in different sizes

Type 2000
  • Stainless steel or gunmetal housing with sleeve, clamped or welded connection
  • Long service life
  • High flow rate
  • Robust actuators with modular accessory program

Type 2002
  • Compact
  • Long service life
  • Robust actuators with modular accessory program
  • Gunmetal housing with thread port connection

Type 2006
  • For mixing or distributing of media
  • Controlled by a pilot valve or centrally by a valve island
  • Flow optimised body in stainless steel
  • Long life time and maintenance-free operation

Type 2012
  • Compact
  • Long service life
  • Robust actuators with modular accessory program
  • Stainless steel housing with flange, thread and weld end connection

Type 2030
  • Flow optimized and deadleg free bodies
  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Robust actuators with modular acessory program
  • Self-draining plastic bodies with true union, solvent socket, weld ends or flanges
  • Applicable for aggressive an corrosive media

Type 2031
  • Flow optimized and deadleg free bodies
  • Hermetical separation of fluids from the operating mechanism by diaphragm

Type 2032
  • Zero dead volume body - no welds
  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Universal and robust actuators with modular accessory range
  • Stainless steel body
  • Quality certifications FDA/3A

Type 2033
  • Zero dead volume body - no welds
  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Universal and robust actuators with modular accessory range
  • Stainless steel body with welded connection
  • Quality certifications FDA/3A

Type 2034
  • Minimum deadleg
  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Easy integration of automation units with ELEMENT
  • Variable block and weld bodies
  • Quality certifications FDA/3A

Type 2036
  • Allows optimized processes designs
  • Reduced installation costs
  • Reduced number of valves and welds
  • Stainless steel bodies in different configurations
  • Approvals FDA, CE, USP VI, ATEX/IECEx, 3.1

Type 2050
  • Can be combined with position feedback or control head
  • Flange acc. ISO 5211 and DIN 3337
  • Long life cycle
  • Optical position indicator
  • Pilot valve connection NAMUR

Type 2051
  • Modular program for mounting of quarter turn valves such as ball valves and butterfly valves
  • NAMUR and ISO 5211 interfaces
  • Position feedback with Type 1061 possible (also for Ex-applications)
  • SideControl Positioner ready - Type 8792/3
  • ATEX 2014/34/EU

Type 2052
  • Modular program for mounting to armatures such as ball valves and butterfly valves
  • NAMUR and ISO 5211 interfaces
  • Position feedbacks, also Ex-versions
  • Mounting of SIDE control positioner

Type 2060
  • Flow optimised stainless steel body with various line connections
  • Trusted components for the longest life time
  • Stainless steel actuator suitable for demanding environments
  • Modular accessory program with stroke limitation and position feedback available

Type 2063
  • Flow optimised stainless steel cast or forged body free of empty space
  • Media separation using different diaphragm materials
  • Trusted components for long life time
  • Stainless steel actuator for demanding environments
  • Large accessory program with stroke limitation and position feedbacks available

Type 2100
  • High flow rate
  • Long service life
  • Easy integration of automation units with ELEMENT
  • Flow-optimized stainless steel housing with threaded, clamp or weld connection
  • Suitable for 10 bar(g) steam

Type 2101
  • Compact design
  • Long service life
  • Easy integration of automation units with ELEMENT
  • Stainless steel body with flange, socket or weld connection
  • Suitable for 10 bar(g) steam

Type 2103
  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Quality certifications FDA

Type 2104

Type 2105
  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Quality certifications FDA/3A

Type 2106
  • For mixing or distributing of mediums
  • Decentralized automation with control head
  • Flow optimized body in stainless steel
  • Long service life and maintenance-free operation
  • Control Head is connected w/o external tubing

Type 2651
  • Stainless steel ball valve
  • High flow rate
  • High medium pressure
  • Long life
  • ISO 5211 Top flange

Type 2652
  • 2- or 3-piece ball valve
  • Pneumatic actuator
  • Compact design
  • Visual position indicator
  • Pilot valve connection NAMUR

Type 2654
  • Stainless steel ball valve
  • High flow values
  • High medium pressures
  • Long service life
  • ISO 5211 piston valve

Type 2655
  • 2 or 3-piece ball valve
  • Pneumatic actuator
  • Compact design
  • Visual position indicator
  • Pilot valve connection NAMUR

Type 2657
  • Application for aggressive media
  • High flow-rate
  • Safe blocked union nuts with Dual Block® Technology

Type 2658
  • Radially expandable body
  • Pneumatic actuator in compact model
  • Optical position indicator
  • Control valve connection acc. to NAMUR
  • Safe blocked union nuts with Dual Block® Technology

Type 2660
  • Brass ball valve
  • High flow values
  • Long life time
  • ISO 5211 top flange

Type 2664

Type 2671
  • Manually operated / Automatable
  • High flow values
  • Shaft and body are non-wetted parts
  • Low torques
  • Zero leakage

Type 2672
  • Compact design
  • High flow rate

Type 2674
  • Manually operated / automatable
  • For aggressive media
  • Low torques
  • Long lifespan
  • Maintenance friendly

Type 3003
  • Direct mounting on quarter-turn valves
  • Manual override standard
  • Adjustable limit switches
  • Multi-voltage

Type 3004
  • Direct mounting for quarter-turn valves
  • Manual override standard
  • Corrosion resistant
  • Adjustable limit switches
  • ATEX II 2 GD Ex d II B T6

Type 3005
  • Direct mounting on quarter-turn valves
  • Manual override standard
  • Corrosion resistant
  • Adjustable limit switches
  • Multi-voltage version

Type 3230
  • Control function convertible
  • Can be used for aggressive medium
  • Compact design

Type 3232
  • Flow optimized and deadleg free bodies
  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Manual actuator in plastic
  • Plastic bodies with true union, solvent socket, weld ends or flanges
  • Suitable for aggressive an corrosive media

Type 3233
  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Quality certifications FDA

Type 3234
  • Zero dead volume body - no welds
  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Actuator in stainless steel or plastic
  • Stainless steel body with clamp or weld ends
  • Quality certifications FDA/3A

Type 3235
  • Zero dead volume body - no welds
  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Manual Actuator in stainless steel or plastic

Type 3280
  • Actuator isolated from flow path
  • Excellent range and fast response times
  • Low power consumption
  • Orifice sizes 1 to 10 mm
  • Versions: Standard, positioner, process controller and high pressure version up to 22 bar

Type 3285
  • Actuator isolated from flow path
  • Excellent range and fast response times
  • Low power consumption
  • Orifice sizes 8 to 25 mm
  • Versions: Standard, positioner, process controller

Type 3320
  • Fail-safe position by energy storage
  • Rapid flow shut off
  • Weather and impact resistant design
  • Designed according to hygienic demands
  • Many diagnostic functions

Type 3321
  • Fail-safe position by energy storage
  • Rapid flow shut off
  • Weather and impact resistant design
  • Designed according to hygienic demands
  • Many diagnostic functions

Type 5470
  • Compact design in 3/2 and 4/2-way versions
  • Extendable valve block
  • Reduced power consumption
  • Different pneumatic connections available
  • Robust construction

Type 6012
  • Direct-acting, compact small-format valve with diameter of up to DN 1.6
  • Screwed coil system
  • Banjo threaded connection for direct mounting on pneumatic valves
  • Simple and quick push-in, flange, or manifold installation
  • Service-friendly manual override

Type 6014
  • Direct-acting, compact valve with diameter of up to DN 2.5
  • Vibration-proof, bolted coil system
  • Banjo threaded connection for direct mounting on pneumatic valves
  • Service-friendly manual override
  • Energy-saving pulse versions

Type 6519
  • High flow-rate capacity
  • Reduced power consumption
  • Single or manifold mounting
  • Standard-, Ex mb and Ex ia versions
  • Threaded port G 1/4” or NAMUR flange

Type 8681
  • Universal attachment for hygienic process valves
  • Contactless position measurement system with 3 switching points (Teach-In function)
  • Coloured status display
  • Manual override operative with closed housing
  • Fieldbus AS-Interface or DeviceNet (option)

Type 8685
  • Compact stainless steel design
  • Contactless valve position registration
  • Coloured illuminated status display
  • Fieldbus AS-Interface (optional)
  • Version for ATEX / IECEx

Type 8686
  • Compact stainless steel design
  • Contactless valve position registration
  • Coloured illuminated status display
  • Fieldbus AS-Interface (optional)
  • Version for ATEX / IECEx

Type 8690
  • Compact design
  • Integrated pilot valve with manual override
  • Integrated control air routing in the actuator
  • Visual position indicator
  • With ATEX II cat. 3G/D and cat. 2D/G approval

Type 8691
  • Contact-free inductive valve position registration (Teach-In function)
  • Coloured illuminated status display
  • Integrated control air routing in the actuator
  • Fieldbus interface AS interface, DeviceNet, IO-Link or büS (Bürkert System Bus)
  • With ATEX II cat. 3G/D / IECEx approval

Type 8695
  • Contact-free inductive valve position registration (Teach-In function)
  • Coloured illuminated status display
  • Integrated control air routing in the actuator
  • Fieldbus interface AS interface / DeviceNet (option)
  • With ATEX II cat. 3G/D approval

Type 8697
  • Compact design
  • Integrated pilot valve with manual override
  • Integrated control air routing in the actuator
  • Automatic adjustment of final position feedback
  • With ATEX II cat. 3G/D and cat. 2D/G approval

Type 8801

Type 8803
  • Accessories pre-mounted and tested
  • Stroke limits
  • Adapters for inductive proximity switches
  • Pilot valves

Type 8804
  • High flow rate value
  • Actuator with adjustable limit switches
  • Visual position indicator

Type 8805
  • Pneumatic rotary actuator
  • Accurate end position setting
  • Full bore flow
  • Favourable flow rates

Type 8840
  • Valve cluster ready for installation
  • Compact design without any potential leakage
  • No assembly effort
  • No piping between the valves needed
  • Trusted actuators for simple automation

Type TEU001
  • ATEX variants available
  • Perfectly suited for pneumatic rotary actuators: 2051 and 2052

Type TKU001
  • Manually operated
  • Low torques
  • Long lifespan
  • Maintenance friendly
  • High flow rate

Type TKU002
  • Low torques
  • Long lifespan
  • Maintenance friendly
  • High flow rate

Type TKU003
  • Low torques
  • Long lifespan
  • Maintenance friendly
  • High flow rate

Type TKU004
  • Manually operated
  • Long life time / low wear
  • High flow rate

My Comparison List