Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
bürkert
We make ideas flow.

Type 8026 - Insertion Paddle Wheel Flowmeter, ELEMENT design

Produkt-Foto Typ 8026

The depiction of the products may differ from the actual specific design.

  • Produkt-Foto Typ 8026
  • Produkt-Foto Typ
  • Produkt-Foto Typ

Type Description

The Bürkert transmitter Type 8026 is a compact device, specially designed for measuring the flow rate in solid-free liquids, in a variety of applications (water, waste water monitoring, chemical processing...). The transmitter is equipped of a sensor with paddle-wheel, available in long or short version (depend on DN of used fitting). This sensor holder is plugged-in and pined to an enclosure with cover, containing the electronic module. A removable display completes this transmitter. The flow transmitter can operate without the display, but it will be required for programming the transmitter (i.e. set parameters, restore default parameters, programme information to be displayed, programme access codes, adjust 4-20 mA output(s) ...) and also for visualizing continuously the measured and processed data. The device Type 8026 is available with: - 2 programmable outputs : one transistor output (NPN) and one 4-20 mA current output (2-wire) - 3 programmable outputs: two transistor outputs (NPN/PNP) and one 4-20 mA current output (2-wire) - 4 programmable outputs: two transistor outputs (NPN/PNP) and two 4-20 mA current outputs (3-wire) The device Type 8026 converts the measured signal, displays different values in different units (if display mounted) and computes the output signals, which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor outputs, the transmitter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops.


  • PN10, DN15 to DN400 fluidic process connection
  • Programmable outputs : one or two transistor output(s) and single or dual 4-20 mA analog output(s)
  • Removable backlit display of flow and/or two totalized volumes
  • Automatic-calibration: TEACH-IN, simulation of outputs signals provided without the need for real flow

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

Downloads

Description
Filename
Filesize
Language / Country
ABD EU-DoC|EU Declaration 1000292040-0_8026_EU-DoC signed.pdf 469.2 kB ML
DTS Transmetteur ELEMENT de débit DS8026-Standard-FR-FR.pdf 649.1 kB FR / FR
DTS Durchfluss-Transmitter ELEMENT DS8026-Transmitter-DE-DE.pdf 645.2 kB DE / DE
DTS Transmisor Caudal ELEMENT ins DS8026-Transmitter-ES-ES.pdf 2.4 MB ES / ES
DTS Flow-Transmitter ELEMENT DS8026-Transmitter-EU-EN.pdf 729.8 kB EN / EU
DTS Fitting für Insertion-Sensor DSS020-Standard-DE-DE.pdf 401.1 kB DE / DE
DTS Fitting for insertion Sensor DSS020-Standard-EU-EN.pdf 402.9 kB EN / EU
DTS Raccord à insertion DSS020-Standard-FR-FR.pdf 400.4 kB FR / FR
MAN Bedienungsanlei 8026-8036-SE36 MA8026-Manual-EU-DE.pdf 5.2 MB DE / EU
MAN Op Instructions 8026-8036-SE36 MA8026-Manual-EU-EN.pdf 5.2 MB EN / EU
MAN Man. utilisat° 8026-8036-SE36 MA8026-Manual-EU-FR.pdf 5.2 MB FR / EU
MAN Quickstart 8026-8036-SE36 MA8026-Quickstart-EU-ML.pdf 6 MB EN,FR,DE / EU
MAN Operating Instruction Display MA8222-Manual-EU-ML.pdf 808.9 kB EN,FR,DE / EU
MAN Fitting for insertion devices MAS020-Fitting-EU-ML.pdf 1.5 MB EN,FR,DE / EU