Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
bürkert
We make ideas flow.

Direct-acting 2/2 or 3/2 way toggle valves

Type 0131 / Ident No. 21964

Produkt-Foto Typ 0131

The depiction of the products may differ from the actual specific design.

  • Produkt-Foto Typ 0131
  • Produkt-Foto Typ 0131
  • Ersatzteil-Zeichnung Bürkert


3/2-way-solenoid valve; direct acting

  • Direct-acting, media-separated valve with diameter of up to DN 25
  • Vibration-proof, block screwed coil system
  • Energy-saving power reduction in all DC versions
  • Increased safety with electric position feedback
  • Robust, service-friendly manual override

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

Product description

The 0131 valve is a direct-acting toggle valve. Various seal material combinations are available depending on the application. Thanks to the diaphragm-separation between actuator and fluid body, aggressive media such as acids and alkaline solutions can also be safety controlled. The offering is rounded out with plastic housings made of PVC or PVDF. The coils are moulded with a chemically resistant epoxy. 'Kick and drop' electronics are moulded into all DC variants for reduced electrical power consumption. An optional electric feedback function reliable detects the switching position. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65.


Commodity Codes
84818079
Country
DE

Technical attributes

Name
Value
Unit
Type 0131
Operation direct-acting
Actuator type Plunger valve
Main valve operating principle Globe valve
Switch function on/off
Media separation Yes
Valve function D - normally inlet port 1 (P/NO) connected with outlet port 2 (B/OUT), exhaust port 3 (R/NC) closed
Fluidic port connection number 3 PCE
Valve function number of switching positions 2 PCE
Valve function manual actuation Yes
Valve function manual actuation type Key button
Valve function manual actuation material PA (Polyamide)
Valve function manual actuation stop Yes
Valve function manual actuation screw slot No
Nominal pressure min 0 bar
Nominal pressure max (liquid) 0.5 bar
Main valve orifice 1 (P) (mm) 15 mm
Kv value (water) 4 m3/h
QNn value (gas) 4270 l/min
Main valve wetted material Brass
Port connection 1 type Inner thread
Port connection 1 thread type G
Port connection 1 thread marking 1/2
Port connection 2 type Inner thread
Port connection 2 thread type G
Port connection 2 thread marking 1/2
Port connection 3 type Inner thread
Port connection 3 thread type G
Port connection 3 thread marking 1/2
Seat seal material NBR (Nitrile rubber)
Sealing toward outside material NBR (Nitrile rubber)
Temperature environment min -10 °C
Temperature environment max 50 °C
Temperature medium min -10 °C
Temperature medium max 90 °C
Voltage / rated voltage 24 V
Voltage / rated voltage 24 V
Voltage tolerance negative 10 %
Voltage tolerance positive 10 %
Voltage frequency 50/60 Hz
AC voltage Yes
DC voltage Yes
Battery voltage Yes
Rated power DC 100 W
Reduced power DC 9 W
Rated power consumption 100 W
inrush power consumption AC 100 V·A
Rated power AC 9 V·A
Electrical connection sort Plug pattern form A according to DIN EN 175301-803
Electrical connection number of contacts 2 + Grounding conductor
Cable plug in delivery enclosed
Cable plug art. no. - type 00008376 - 2508
Protection type (IP max. with suitable connector) 65
Coil type block bolted
Coil insulation material (encasement) Epoxy
Coil size 49 mm
Coil wiring overvoltage protection Suppressor diode
Coil wiring rectifier Yes
Coil wiring polarity recovery diode Yes
Thermal insulation class of the actuator H
Nominal operation/Duty cycle 100 %
Switch time open min 10 ms
Switch time open max. 20 ms
Switch time close min 40 ms
Switch time close max. 60 ms
Valve setting opening time No
Valve setting closing time No
Back-pressure-resistant version No
Vacuum version No
Analysis version No
Oil burner valve No
Steam version No
Low-noise version No
Main valve with integrated screen No
Without mounting No
Valve construction Valve complete
Weight 1,920000 kg
Weight 1,920000 kg
Show full table Collapse table

Downloads

Description
Filename
Filesize
Language / Country
3D_ANIMATION 3D-Animation - 0131 3D-PDF-EN-MV-0131_pdf.pdf 3 MB EN
ABD EU-DoC|EU Declaration 1000146922-A_131_EU-DoC.pdf 831.5 kB EN,FR,DE
DTS Magnetventil, NC/NO DS0131-Standard-DE-DE.pdf 453.9 kB DE / DE
DTS Solenoid Valve, NC/NO DS0131-Standard-EU-EN.pdf 450 kB EN / EU
DTS Solenoid Valve, NC/NO DS0131-Standard-US-EN.pdf 178.5 kB EN / US
MAN Operating Instructions MA0131-Standard-EU-ML.pdf 1.7 MB EN,FR,DE / EU
MAN Supplement HI electronic MA0131-Supplement-EU-ML.pdf 122.4 kB EN,FR,DE / EU
Position
Item No.
Description
01 237189
02 619641
03 15080