Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    Insertion Paddle Wheel Flowmeter, ELEMENT design

    Type 8026 / Ident No. 561870

    Produkt-Foto Typ 8026

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 8026
    • Produkt-Foto Typ
    • Produkt-Foto Typ

    Insertion flow transmitter

    • PN10, DN15 to DN400 fluidic process connection
    • Programmable outputs : one or two transistor output(s) and single or dual 4-20 mA analog output(s)
    • Removable backlit display of flow and/or two totalized volumes
    • Automatic-calibration: TEACH-IN, simulation of outputs signals provided without the need for real flow

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Product description

    The Bürkert transmitter Type 8026 is a compact device, specially designed for measuring the flow rate in solid-free liquids, in a variety of applications (water, waste water monitoring, chemical processing...). The transmitter is equipped of a sensor with paddle-wheel, available in long or short version (depend on DN of used fitting). This sensor holder is plugged-in and pined to an enclosure with cover, containing the electronic module. A removable display completes this transmitter. The flow transmitter can operate without the display, but it will be required for programming the transmitter (i.e. set parameters, restore default parameters, programme information to be displayed, programme access codes, adjust 4-20 mA output(s) ...) and also for visualizing continuously the measured and processed data. The device Type 8026 is available with: - 2 programmable outputs : one transistor output (NPN) and one 4-20 mA current output (2-wire) - 3 programmable outputs: two transistor outputs (NPN/PNP) and one 4-20 mA current output (2-wire) - 4 programmable outputs: two transistor outputs (NPN/PNP) and two 4-20 mA current outputs (3-wire) The device Type 8026 converts the measured signal, displays different values in different units (if display mounted) and computes the output signals, which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor outputs, the transmitter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops.


    Commodity Codes
    90261021
    Country
    FR

    Technical attributes

    Name
    Value
    Unit
    Type 8026
    Flow rate (volume) Yes
    Continuous measurement Yes
    Dosing No
    Switch No
    Construction device Compact
    Display type Display module
    Protection class measurement device (IP) 65/67
    Protection rate measurement device NEMA 4x
    DC voltage min. 14 V
    DC voltage max. 36 V
    Battery voltage No
    Operating supply type 2 conductor
    Precision of volume flow rate in relation to reading 1 %
    Temperature environment min -10 °C
    Temperature environment max 60 °C
    Temperature medium min -15 °C
    Temperature medium max 100 °C
    Pressure Class (PN) PN 10
    Dynamic viscosity min. 0 cP
    Dynamic viscosity max. 300 cP
    Detection of flow direction No
    Sensor type Paddle wheel
    Paddle wheel type Magnetic
    Paddle wheel measuring principle detection Hall
    Fitting electronic interface Insertion 2 (inch)
    Electrical connection 1 type Plug - M12
    Electrical connection 1 quantity 1 PCE
    Electrical connection 1 number of contacts 5 PCE
    Electrical connection 1 gender male
    Electrical connection 1 material category Light metals
    Electrical connection 1 material Diecast zinc, nickel-plated
    Electrical connection 1 seal material NBR (Nitrile rubber)
    Output type analog quantity 1 PCE
    Output analogue current functioning principle source Yes
    Output analogue current functioning principle drain Yes
    Output type analog sinus No
    Output type current modulated according to NAMUR No
    Output 1 type analog current 4-20 mA
    Output 1 digital type Transistor
    Output 1 digital transistor connection NPN Yes
    Output 1 digital transistor connection PNP No
    Digital output 1 transistor contactless 0.7 A
    Electronics body material Stainless steel
    Cover material PPS (Polyphenylene sulphide)
    Protection lid material PC (Polycarbonate)
    Nut material PC (Polycarbonate)
    Seal sensor/housing material EPDM (Ethylene-propylene-diene rubber) food-quality
    Seal housing/cover material EPDM (Ethylene-propylene-diene rubber)
    Protection lid seal material EPDM (Ethylene-propylene-diene rubber) food-quality
    Electrical connection plate material Stainless steel
    Screw material Stainless steel
    Fastening part material PSU (Polysulfone) / PPSU (Polyphenylsulfone)
    Parametrisation local Yes
    Parametrisation separate No
    Parametrisation fixed No
    Finger material composition Plastics
    Finger material PVDF (Polyvinylidene fluoride)
    Medium-contacting parts seal material FKM (Fluor rubber)
    Paddle wheel material PVDF (Polyvinylidene fluoride)
    Paddle wheel axle material Ceramic
    Bearing material Ceramic
    Insertion sensor length long
    Tropical climate version Yes
    Time dosing No
    Batch dosing No
    Extended diagnosis No
    Volumeter Yes
    Weight 0,800000 kg
    Weight 0,800000 kg
    Show full table Collapse table

    Downloads

    Description
    Filename
    Filesize
    Language / Country
    ABD EU-DoC|EU Declaration 1000292040-0_8026_EU-DoC signed.pdf 469.2 kB ML
    DTS Transmetteur ELEMENT de débit DS8026-Standard-FR-FR.pdf 648.9 kB FR / FR
    DTS Durchfluss-Transmitter ELEMENT DS8026-Transmitter-DE-DE.pdf 645.2 kB DE / DE
    DTS Transmisor Caudal ELEMENT ins DS8026-Transmitter-ES-ES.pdf 2.4 MB ES / ES
    DTS Flow-Transmitter ELEMENT DS8026-Transmitter-EU-EN.pdf 729.7 kB EN / EU
    DTS Fitting für Insertion-Sensor DSS020-Standard-DE-DE.pdf 400.7 kB DE / DE
    DTS Fitting for insertion Sensor DSS020-Standard-EU-EN.pdf 402.9 kB EN / EU
    DTS Raccord à insertion DSS020-Standard-FR-FR.pdf 400.2 kB FR / FR
    MAN Bedienungsanlei 8026-8036-SE36 MA8026-Manual-EU-DE.pdf 5.2 MB DE / EU
    MAN Op Instructions 8026-8036-SE36 MA8026-Manual-EU-EN.pdf 5.2 MB EN / EU
    MAN Man. utilisat° 8026-8036-SE36 MA8026-Manual-EU-FR.pdf 5.2 MB FR / EU
    MAN Quickstart 8026-8036-SE36 MA8026-Quickstart-EU-ML.pdf 6 MB EN,FR,DE / EU
    MAN Operating Instruction Display MA8222-Manual-EU-ML.pdf 808.8 kB EN,FR,DE / EU
    MAN Fitting for insertion devices MAS020-Fitting-EU-ML.pdf 1.5 MB EN,FR,DE / EU
    Position
    Item No.
    Description
    438680 Plug M12 5 positions 2m screened
    917116 flange sleeve M12 5pl, screwed cont.
    Position
    Item No.
    Description
    01 559168 Element sensors display module
    02 561843
    03 619205
    04 619204
    05 552111