Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
We make ideas flow.
We make ideas flow.

    INSERTION flowmeter or batch controller with paddle wheel and flow transmitter or remote batch controller

    Type 8025 / Ident No. 418803

    Produkt-Foto Typ 8025

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 8025
    • Produkt-Foto Typ 8025
    • Massbild
    • Massbild
    • Massbild
    • Massbild
    • Massbild
    • Ersatzteil-Zeichnung Bürkert

    Insertion flow transmitter

    • Up to PN10, size of measurement pipes: DN06 to DN400
    • Display for indication of flow rate and volume with two flow totalizers or dosing
    • Automatic calibration using Teach-In
    • Inputs (with batch controller) and all outputs can be checked without the need of actual flow
    • Total and daily totalized for batch quantity and number of batches, volume or mass totalizers displayed (with batch controller)

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Product description

    The 8025 flowmeter or batch controller is specially designed for measuring the flow rate or for dosing in neutral, slightly aggressive, solid-free liquids. Type 8025 flowmeter is offered in different models: • The compact flowmeter with paddle wheel sensor is available in two versions: standard output signal or battery powered indicator version without output. • The remote transmitter is available in two versions: – Universal transmitter for panel or wall-mounted versions, which can be connected to any sensors already on the market; sensors with open collector output,reed relay output, TTL, CMOS or coil can be operated by this transmitter. – Transmitter, for panel or wall mounting: standard input signal for connection to the Bürkert 8020/8030/SE30+S077 flowmeter “Low Power” version. Type 8025 batch controller is also offered in different models: • The compact batch controller with paddle wheel sensor • The remote batch controller for panel or wall-mounted versions, which can be connected to the Bürkert 8020/8030/8031/8041/SE30+S077 flowmeter or any sensors already on the market; sensors with open collector output,reed relay output, TTL, CMOS or coil can be operated by this batch controller.

    Commodity Codes

    Technical attributes

    Type 8025
    Flow rate (volume) Yes
    Continuous measurement Yes
    Dosing No
    Switch No
    Construction device Compact
    Display type Display
    Protection class measurement device (IP) 65
    DC voltage min. 12 V
    DC voltage max. 36 V
    Battery voltage No
    Operating supply type 2 conductor
    Precision of volume flow rate in relation to reading 1 %
    Temperature environment min -10 °C
    Temperature environment max 60 °C
    Temperature medium min -15 °C
    Temperature medium max 80 °C
    Pressure Class (PN) PN 10
    Dynamic viscosity min. 0 cP
    Dynamic viscosity max. 300 cP
    Detection of flow direction No
    Transmitter type Basic
    Sensor type Paddle wheel
    Paddle wheel type Magnetic
    Paddle wheel measuring principle detection Hall
    Fitting electronic interface Insertion 2 (inch)
    Electrical connection 1 type Cable gland M20
    Electrical connection 1 quantity 2 PCE
    Electrical connection 1 gender Terminal block
    Electrical connection 1 material category Plastics
    Electrical connection 1 material PA (Polyamide)
    Electrical connection 1 seal material Neoprene
    Output type analog quantity 1 PCE
    Output 1 type analog current 4-20 mA
    Output 1 digital type Transistor
    Output 1 digital transistor connection NPN Yes
    Output 1 digital transistor connection PNP Yes
    Digital output 1 transistor contactless 0.1 A
    Electronics body material PC (Polycarbonate)
    Cover material PC (Polycarbonate)
    Protection lid material PC (Polycarbonate)
    Nut material PC (Polycarbonate)
    Seal sensor/housing material FKM (Fluor rubber)
    Seal housing/cover material NBR
    Protection lid seal material Silicone
    Screw material Stainless steel
    Fastening part material PSU (Polysulfone) / PPSU (Polyphenylsulfone)
    Parametrisation local Yes
    Parametrisation separate No
    Parametrisation fixed No
    Finger material composition Plastics
    Finger material PVDF (Polyvinylidene fluoride)
    Medium-contacting parts seal material FKM (Fluor rubber)
    Paddle wheel material PVDF (Polyvinylidene fluoride)
    Paddle wheel axle material Ceramic
    Bearing material Ceramic
    Insertion sensor length long
    Tropical climate version Yes
    Time dosing No
    Batch dosing No
    Extended diagnosis No
    Volumeter Yes
    Weight 0,830000 kg
    Weight 0,830000 kg
    Show full table Collapse table


    Data Sheets

    Language / Country
    DTS Batch controller 1.1 MB EN / EU
    DTS Control Panel 96.9 kB EN / GB
    DTS Fitting for insertion Sensor 402.9 kB EN / EU
    DTS Flow-Transmitter 956.3 kB EN / US
    DTS Flow-Transmitter 2 MB EN / EU
    DTS Contrôleur de dosage num 1.1 MB FR / FR
    DTS Dosiergerät 1.1 MB DE / DE
    DTS Dosificador de caudal 1.7 MB ES / ES
    DTS Durchfluss-Transmitter 2 MB DE / DE
    DTS Fitting de insercion 887.4 kB ES / ES
    DTS Fitting für Insertion-Sensor 400.7 kB DE / DE
    DTS Raccord à insertion 400.2 kB FR / FR
    DTS Transmetteur à INSERTION 2 MB FR / FR
    DTS Transmisor de caudal 837.2 kB ES / ES
    DTS Transmissor de Vazão 743.3 kB PT / BR

    User Manuals

    Language / Country
    MAN 8035 Battery Flowmeter 1.4 MB EN,FR,DE / EU
    MAN Fitting for insertion devices 1.5 MB EN,FR,DE / EU
    MAN MAN_8025_8035_SE35_BATCH 5.5 MB EN / EU
    MAN Manual 8025-8035-SE35 standard 4.7 MB EN / EU
    MAN QS standard 8025-8035-SE35 3.1 MB EN / EU
    MAN QS_8025_8035_SE35_BATCH 2.9 MB EN / EU
    MAN Replacement instructions 319 kB EN,FR,DE / EU
    MAN UNIVERSAL Flow Transmitter 1.8 MB EN / EU
    MAN UNIVERSAL Flow Transmitter 1.8 MB EN,FR,DE / EU
    MAN BA 8025-8035-SE35 Standard 4.7 MB DE / EU
    MAN MAN_8025_8035_SE35_BATCH 5.4 MB DE / EU
    MAN MAN_8025_8035_SE35_BATCH 5.6 MB FR / EU
    MAN Manual de Instrucciones 923.1 kB ES / ES
    MAN Manuel 8025-8035-SE35 standard 4.7 MB FR / EU
    MAN QS standard 8025-8035-SE35 3.2 MB DE / EU
    MAN QS standard 8025-8035-SE35 3.2 MB FR / EU
    MAN QS_8025_8035_SE35_BATCH 3 MB DE / EU
    MAN QS_8025_8035_SE35_BATCH 3.1 MB FR / EU
    MAN Transmetteur débit UNIVERSAL 1 MB FR / EU
    MAN UNIVERSAL Transmitter 1 MB DE / EU
    MAN Universal 648.8 kB ES / ES

    EU Declaration

    Language / Country
    ABD EU-DoC|EU Declaration 492.2 kB ML
    Item No.
    01 553189
    02 553191
    03 553169
    06 449755 Cable connector M20 x 1,5 black
    07 551775
    08 418324 To flow sensor resound, long once imp.
    09 425526