Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    INSERTION flowmeter or batch controller with paddle wheel and flow transmitter or remote batch controller

    Type 8025 / Ident No. 418778

    Produkt-Foto Typ 8025

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 8025
    • Produkt-Foto Typ 8025
    • Massbild
    • Massbild
    • Massbild
    • Massbild
    • Massbild
    • Ersatzteil-Zeichnung Bürkert

    Insertion flow transmitter

    • Up to PN10, size of measurement pipes: DN06 to DN400
    • Display for indication of flow rate and volume with two flow totalizers or dosing
    • Automatic calibration using Teach-In
    • Inputs (with batch controller) and all outputs can be checked without the need of actual flow
    • Total and daily totalized for batch quantity and number of batches, volume or mass totalizers displayed (with batch controller)

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Product description

    The 8025 flowmeter or batch controller is specially designed for measuring the flow rate or for dosing in neutral, slightly aggressive, solid-free liquids. Type 8025 flowmeter is offered in different models: • The compact flowmeter with paddle wheel sensor is available in two versions: standard output signal or battery powered indicator version without output. • The remote transmitter is available in two versions: – Universal transmitter for panel or wall-mounted versions, which can be connected to any sensors already on the market; sensors with open collector output,reed relay output, TTL, CMOS or coil can be operated by this transmitter. – Transmitter, for panel or wall mounting: standard input signal for connection to the Bürkert 8020/8030/SE30+S077 flowmeter “Low Power” version. Type 8025 batch controller is also offered in different models: • The compact batch controller with paddle wheel sensor • The remote batch controller for panel or wall-mounted versions, which can be connected to the Bürkert 8020/8030/8031/8041/SE30+S077 flowmeter or any sensors already on the market; sensors with open collector output,reed relay output, TTL, CMOS or coil can be operated by this batch controller.


    Commodity Codes
    90261021
    Country
    FR

    Technical attributes

    Name
    Value
    Unit
    Type 8025
    Flow rate (volume) Yes
    Continuous measurement Yes
    Dosing No
    Switch No
    Construction device Compact
    Display type Display
    Protection class measurement device (IP) 65
    DC voltage min. 12 V
    DC voltage max. 36 V
    Battery voltage No
    Operating supply type 3 conductor
    Precision of volume flow rate in relation to reading 1 %
    Temperature environment min -10 °C
    Temperature environment max 60 °C
    Temperature medium min -15 °C
    Temperature medium max 80 °C
    Pressure Class (PN) PN 10
    Dynamic viscosity min. 0 cP
    Dynamic viscosity max. 300 cP
    Detection of flow direction No
    Transmitter type Basic
    Sensor type Paddle wheel
    Paddle wheel type Magnetic
    Paddle wheel measuring principle detection Hall
    Fitting electronic interface Insertion 2 (inch)
    Electrical connection 1 type Cable gland M20
    Electrical connection 1 quantity 2 PCE
    Electrical connection 1 gender Terminal block
    Electrical connection 1 material category Plastics
    Electrical connection 1 material PA (Polyamide)
    Electrical connection 1 seal material Neoprene
    Output type analog quantity 1 PCE
    Output analogue current functioning principle source Yes
    Output analogue current functioning principle drain Yes
    Output 1 type analog current 4-20 mA
    Output 1 digital type Transistor
    Output 1 digital transistor connection NPN Yes
    Output 1 digital transistor connection PNP Yes
    Digital output 1 transistor contactless 0.1 A
    Output 2 digital type Relay
    Output 2 digital version NC No
    Output 2 digital version NO Yes
    Output 2 digital relay/reed voltage AC 230 V
    Output 2 digital relay/reed voltage DC 40 V
    Output 2 digital relay/reed power AC 3 A
    Output 2 digital relay/reed power DC 3 A
    Output 3 digital type Relay
    Output 3 digital version NC No
    Output 3 digital version NO Yes
    Output 3 digital relay/reed voltage AC 230 V
    Output 3 digital relay/reed voltage DC 40 V
    Output 3 digital relay/reed power AC 3 A
    Output 3 digital relay/reed power DC 3 A
    Electronics body material PC (Polycarbonate)
    Cover material PC (Polycarbonate)
    Protection lid material PC (Polycarbonate)
    Nut material PC (Polycarbonate)
    Seal sensor/housing material FKM (Fluor rubber)
    Seal housing/cover material NBR
    Protection lid seal material Silicone
    Screw material Stainless steel
    Fastening part material PSU (Polysulfone) / PPSU (Polyphenylsulfone)
    Parametrisation local Yes
    Parametrisation separate No
    Parametrisation fixed No
    Finger material composition Plastics
    Finger material PVDF (Polyvinylidene fluoride)
    Medium-contacting parts seal material FKM (Fluor rubber)
    Paddle wheel material PVDF (Polyvinylidene fluoride)
    Paddle wheel axle material Ceramic
    Bearing material Ceramic
    Insertion sensor length short
    Tropical climate version Yes
    Time dosing No
    Batch dosing No
    Extended diagnosis No
    Volumeter Yes
    Weight 0,840000 kg
    Weight 0,840000 kg
    Show full table Collapse table

    Downloads

    Data Sheets

    Description
    Filesize
    Language / Country
    DTS Type 8025 data sheet | digital batch controller 1.1 MB EN / EU
    DTS Type 8025 data sheet | digital flowmeter for continuous flow measurement 2 MB EN / EU
    DTS Type 8025 data sheet | digital flowmeter for continuous flow measurement [US units] 973.3 kB EN / US
    DTS Type 8025 data sheet | singleor multi batch controller system 100.7 kB EN / GB
    DTS Type S020 data sheet | Insertion fitting for flow or analytical measurement 421.5 kB EN / EU
    DTS Tipo 8025 folha de dados | aparelho de medição do fluxo comroda de pás Insertion/doseador 766.8 kB PT / BR
    DTS Tipo 8025 hoja de datos | caudalímetro de rueda de aletas/dosificador Insertion 1.7 MB ES / ES
    DTS Tipo 8025 hoja de datos | transmisor digital para medición dcaudal en continuo 872.1 kB ES / ES
    DTS Tipo S020 hoja de datos | racor para pH ELEMENT y medidoresde conductividad conductiva 923.1 kB ES / ES
    DTS Typ 8025 Datenblatt | digitales Dosiergerät 1.1 MB DE / DE
    DTS Typ 8025 Datenblatt | digitales Durchflussmessgerät 2 MB DE / DE
    DTS Typ S020 Datenblatt | Insertion-Fitting für Durchfluss-/Analysemessungen 420.1 kB DE / DE
    DTS Type 8025 fiches techniques |Contrôleur de dosage Insertion numérique 1.1 MB FR / FR
    DTS Type 8025 fiches techniques |Débitmètre Insertion numérique 2 MB FR / FR
    DTS Type S020 fiches techniques |Raccord Insertion pour les mesures de débit ou d'analyse 418.5 kB FR / FR

    User Manuals

    Description
    Filesize
    Language / Country
    MAN Operat. Instr. Type 8025 8035SE35 | Insertion / Inline flowmeter/Flow transm.,w.batteries 1.4 MB EN,FR,DE / EU
    MAN Operating Instructions Type 8025 8035 SE35 BATCH | Batch controller 5.5 MB EN / EU
    MAN Operating Instructions Type 8025 8035 SE35 | Insertion or Inline flowmeter / transmitter 2.1 MB EN / EU
    MAN Operating Instructions Type 8025 UNIVERSAL | Flow transmitter 1.8 MB EN / EU
    MAN Operating Instructions Type S020 | Insertion fitting 1.6 MB EN,FR,DE / EU
    MAN Quickstart Type 8025 8035 SE35 BATCH | Batch controller 3 MB EN / EU
    MAN Quickstart Type 8025 UNIVERSAL | Insertion flowmeter or batch controller 1.8 MB EN,FR,DE / EU
    MAN Quickstart Type 8025 | Insertion flowmeter with paddle-wheel 1.5 MB EN / EU
    MAN Service manual Type 8025 UNIVERSAL 8025 BATCH 8035 BATCH SE35 BATCH | 115/230 V AC board 324.3 kB EN,FR,DE / EU
    MAN Bedienung Typ 8025 8035 SE35 | Insertion- oder Inline-Durchflussmesser / -transmitter 2.1 MB DE / EU
    MAN Bedienungsanleitung Typ 8025 8035 SE35 BATCH | Dosiergerät 5.4 MB DE / EU
    MAN Bedienungsanleitung Typ 8025 UNIVERSAL | Durchflusstransmitter 1 MB DE / EU
    MAN Manual de usuario Tipo 8025 |Caudalímetro de rueda de aletas/dosificador Insertion 706.9 kB ES / ES
    MAN Manual de usuario Tipo 8025 |Caudalímetro de rueda de aletas/dosificador Insertion 1 MB ES / ES
    MAN Manuel d'utilisation Type 8025 8035 SE35 | Débitmètre Insertion ou Inline/Transm. de débit 2.1 MB FR / EU
    MAN Manuel d?utilisation Type 8025 8035 SE35 BATCH | Contrôleurde dosage 5.6 MB FR / EU
    MAN Manuel d?utilisation Type 8025 UNIVERSAL | Transmetteur de débit 1 MB FR / EU
    MAN Quickstart Typ 8025 8035 SE35BATCH | Dosiergerät 3 MB DE / EU
    MAN Quickstart Typ 8025 | Insertion-Durchflussmesser mit Flügelrad 1.5 MB DE / EU
    MAN Quickstart Type 8025 8035 SE35 BATCH | Contrôleur de dosage 3.1 MB FR / EU
    MAN Quickstart Type 8025 | Débitmètre à Insertion à ailette 1.4 MB FR / EU

    EU Declaration

    Description
    Filesize
    Language / Country
    ABD EU-DoC|EU Declaration 492.2 kB ML
    Position
    Item No.
    Description
    01 553189
    02 553192
    03 553170 PCB flow-transmitter digital CAL.F4
    06 449755 Cable connector M20 x 1,5 black
    07 551775
    08 418316
    09 425526