Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
We make ideas flow.

Insertion - magmeter

Type 8045 / Ident No. 449670

Produkt-Foto Typ 8045

The depiction of the products may differ from the actual specific design.

  • Produkt-Foto Typ 8045
  • Produkt-Foto Typ 8045
  • SPD-8045-NR-108_thumb.png

Insertion MID flow transmitter

  • Sensor in solid state technology
  • Shows both flow rate and volume
  • Simulation: all output signals provided without the need for real flow
  • Clean in place (CIP), FDA approved
  • Version with Alloy C22 electrodes

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

Product description

The electromagnetic flow meter Type 8045 has been designed for pipes with diameters ranging from DN 06 to DN 400 and liquids having a conductivity > 20 μS/cm. The transmitter has a display, a keyboard and provides 4-20 mA, relay and pulse outputs; The version with a stainless steel sensor has been designed for applications with high pressures (PN16) and high temperatures (up to 110°C). The version with Alloy C22 electrodes has been designed for applications with aggressive fluids (chemicals) and especially sea water applications.

EAN Number
UPC Number
Commodity Codes

Technical attributes

Type 8045
Flow rate (volume) Yes
Continuous measurement Yes
Dosing No
Switch No
Construction device Compact
Display type Display
Protection class measurement device (IP) 65
DC voltage min. 18 V
DC voltage max. 36 V
Battery voltage No
Operating supply type 3 conductor
Precision of volume flow rate in relation to reading 0.5 %
Temperature environment min -10 °C
Temperature environment max 60 °C
Temperature medium min -15 °C
Temperature medium max 110 °C
Pressure Class (PN) PN 16
Dynamic viscosity min. 0 cP
Dynamic viscosity max. 2000 cP
Conductivity min 20 µS/cm
Detection of flow direction Yes
Sensor type Magnetic inductive
Magnetic inductive type Insertion
Fitting electronic interface Insertion 2 (inch)
Electrical connection 1 type Cable gland M20
Electrical connection 1 quantity 2 PCE
Electrical connection 1 gender Terminal block
Electrical connection 1 material category Plastics
Electrical connection 1 material PA (Polyamide)
Electrical connection 1 seal material Neoprene
Output type analog quantity 1 PCE
Output analogue current functioning principle source Yes
Output analogue current functioning principle drain Yes
Output 1 type analog current 4-20 mA
Output 1 digital type Transistor
Output 1 digital transistor connection NPN Yes
Output 1 digital transistor connection PNP Yes
Digital output 1 transistor contactless 0.1 A
Electronics body material PPA
Cover material PPA
Protection lid material PSU (Polysulfone) / PPSU (Polyphenylsulfone)
Nut material PPA
Seal sensor/housing material FKM (Fluor rubber)
Seal housing/cover material NBR
Protection lid seal material Silicone
Screw material Stainless steel
Fastening part material PSU (Polysulfone) / PPSU (Polyphenylsulfone)
Parametrisation local Yes
Parametrisation separate No
Parametrisation fixed No
Finger material composition Metals
Finger material Stainless steel
Medium-contacting parts seal material FKM (Fluor rubber)
Electrode material Stainless steel
Electrode holder material PEEK (Polyetheretherketone)
Insertion sensor length short
Time dosing No
Batch dosing No
Extended diagnosis No
Volumeter Yes
Weight 0,980000 kg
Weight 0,980000 kg
Show full table Collapse table


Language / Country
3D_ANIMATION 3D-Animation - 8045 3D-PDF-DE-SD-MIDD5_pdf.pdf 3.3 MB DE
3D_ANIMATION 3D-Animation - 8045 3D-PDF-EN-SD-MIDD5_pdf.pdf 3.3 MB EN
3D_ANIMATION 3D-Animation - 8045 3D-PDF-DE-SD-MIDID17_pdf.pdf 3.7 MB DE
ABD EU-DoC|EU Declaration 1000292043-0_8045_EU-DoC signed.pdf 492.2 kB ML
3D_ANIMATION 3D-Animation - 8045 3D-PDF-EN-SD-MIDID17_pdf.pdf 3.7 MB EN
DTS Caudalímetro Electromagnetico DS8045-FlowMeter-ES-ES.pdf 280.5 kB ES / ES
DTS Transmissor de Vazão DS8045-Standard-BR-PT.pdf 714.4 kB PT / BR
DTS Durchflusstransmitter DS8045-Standard-DE-DE.pdf 1 MB DE / DE
DTS Flow-Transmitter DS8045-Standard-EU-EN.pdf 1.1 MB EN / EU
DTS Transmetteur à insertion DS8045-Standard-FR-FR.pdf 1 MB FR / FR
DTS Flow Transmitter DS8045-Standard-US-EN.pdf 499.4 kB EN / US
DTS Fitting für Insertion-Sensor DSS020-Standard-DE-DE.pdf 401.1 kB DE / DE
DTS Fitting de insercion DSS020-Standard-ES-ES.pdf 887 kB ES / ES
DTS Fitting for insertion Sensor DSS020-Standard-EU-EN.pdf 402.9 kB EN / EU
DTS Raccord à insertion DSS020-Standard-FR-FR.pdf 400.4 kB FR / FR
MISC Flyer Flowmeter Type 8045 632.4 kB EN / EU
MAN Bedienungsanleitung 8045 MA8045-MA-EU-DE.pdf 816 kB DE / EU
MAN Operating Instructions 8045 MA8045-MA-EU-EN.pdf 810.9 kB EN / EU
MAN Manuel d'utilisation 8045 MA8045-MA-EU-FR.pdf 827.8 kB FR / EU
MAN Instrucciones de function MA8045-OperatorMA-ES-ES.pdf 5.8 MB ES / ES
MAN Quickstart MA8045-QS-EU-DE.pdf 475.1 kB DE / EU
MAN Quickstart 8045 MA8045-QS-EU-EN.pdf 468.6 kB EN / EU
MAN Quickstart 8045 MA8045-QS-EU-FR.pdf 471.9 kB FR / EU
MAN Fitting for insertion devices MAS020-Fitting-EU-ML.pdf 1.5 MB EN,FR,DE / EU
MAN Mounting instructions MASET8-Mount-EU-ML.pdf 84.2 kB EN,FR,DE / EU
Item No.
01 553190
02 449755 Cable connector M20 x 1,5 black
03 619205
04 440229
05 552111