Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    Insertion magnetic inductive flowmeter

    Type 8045 / Ident No. 426498

    Produkt-Foto Typ 8045

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 8045
    • Produkt-Foto Typ 8045
    • SPD-8045-NR-108_thumb.png
    • Massbild
    • Massbild
    • Massbild
    • Massbild
    • 9000225503.jpeg

    Insertion MID flow transmitter

    • Sensor without moving parts
    • Indicates both flow rate and volume
    • Simulation of all output signals
    • Clean in place (CIP), FDA-compliant materials
    • Version with Alloy C22 electrodes

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Product description

    The electromagnetic flowmeter 8045 is made up of an electronic module including a backlit display, operating keys and a sensor consisting of PVDF or stainless steel material. It has been designed to measure a flow rate of neutral and slightly aggressive fluids with a conductivity of more than 20 µS/cm in DN06...DN400 pipes. It is equipped with a 4...20 mA output, a digital output (pulse output by default). Some versions are equipped with two relay outputs and one digital input. Two independent totalizers allow counting the flow rate. The available process connections are: - G2” connection for the version with a PVDF sensor - G2” or clamp connection for the version with a stainless steel sensor. The version with a stainless steel sensor can be used in applications with higher pressures (PN16) and higher temperatures (110°C). The version with Alloy C22 electrodes has been designed for applications with aggressive fluids (chemicals) and especially sea water applications.


    EAN Number
    4053913021668
    Commodity Codes
    90261021
    Country
    FR

    Technical attributes

    Name
    Value
    Unit
    Type 8045
    Product sub-group Flow rate
    Flow rate (volume) Yes
    Concentration No
    Continuous measurement Yes
    Dosing No
    Switch No
    Construction device Compact
    Display type Display
    Protection class measurement device (IP) 65
    DC voltage min. 18 V
    DC voltage max. 36 V
    Battery voltage No
    Operating supply type 3 conductor
    Precision of volume flow rate in relation to reading 0.5 %
    Temperature environment min -10 °C
    Temperature environment max 60 °C
    Temperature medium min 0 °C
    Temperature medium max 80 °C
    Pressure Class (PN) PN 10
    Dynamic viscosity min. 0 cP
    Dynamic viscosity max. 2000 cP
    Conductivity min 20 µS/cm
    Detection of flow direction Yes
    Sensor type Magnetic inductive
    Magnetic inductive type Insertion
    Fitting electronic interface Insertion 2 (inch)
    Electrical connection 1 type Cable gland M20
    Electrical connection 1 quantity 2 PCE
    Electrical connection 1 gender Terminal block
    Electrical connection 1 material category Plastics
    Electrical connection 1 material PA (Polyamide)
    Electrical connection 1 seal material Neoprene
    Output type analog quantity 1 PCE
    Output analogue current functioning principle source Yes
    Output analogue current functioning principle drain Yes
    Output 1 type analog current 4-20 mA
    Output 1 digital type Transistor
    Output 1 digital transistor connection NPN Yes
    Output 1 digital transistor connection PNP Yes
    Digital output 1 transistor contactless 0.1 A
    Electronics body material category Plastics
    Electronics body material PC (Polycarbonate)
    Cover material PC (Polycarbonate)
    Protection lid material PC (Polycarbonate)
    Nut material PC (Polycarbonate)
    Front foil material category Plastics
    Front foil material Polyester
    Seal sensor/housing material FKM (Fluor rubber)
    Seal housing/cover material NBR
    Protection lid seal material Silicone
    Screw material Stainless steel
    Fastening part material PSU (Polysulfone) / PPSU (Polyphenylsulfone)
    Parametrisation local Yes
    Parametrisation separate No
    Parametrisation fixed No
    Finger material composition Plastics
    Finger material PVDF (Polyvinylidene fluoride)
    Medium-contacting parts seal material FKM (Fluor rubber)
    Electrode material Stainless steel
    Insertion sensor length short
    Time dosing No
    Batch dosing No
    Extended diagnosis No
    Volumeter Yes
    Weight 0,850000 kg
    Weight 0,850000 kg
    Show full table Collapse table

    Downloads

    Data Sheets

    Description
    Filesize
    Language / Country
    DTS Type 8045 data sheet | electromagnetic Insertion electromagnetic flowmeter 1.9 MB EN / EU
    DTS Type 8045 data sheet | electromagnetic Insertion electromagnetic flowmeter [US units] 527.9 kB EN / US
    DTS Type S020 data sheet | Insertion fitting for flow or analytical measurement 421.5 kB EN / EU
    DTS Tipo 8045 folha de dados | aparelho de medição do fluxo magnético-indutivo Insertion 737.6 kB PT / BR
    DTS Tipo 8045 hoja de datos | Insertion ? Caudalímetro magnético inductivo 298.4 kB ES / ES
    DTS Tipo S020 hoja de datos | racor para pH ELEMENT y medidoresde conductividad conductiva 923.1 kB ES / ES
    DTS Typ 8045 Datenblatt | magnetisch-induktives Insertion-Durchflussmessgerät 1.9 MB DE / DE
    DTS Typ S020 Datenblatt | Insertion-Fitting für Durchfluss-/Analysemessungen 420.1 kB DE / DE
    DTS Type 8045 fiches techniques |Débitmètre Insertion électromagnétique 1.9 MB FR / FR
    DTS Type S020 fiches techniques |Raccord Insertion pour les mesures de débit ou d'analyse 418.5 kB FR / FR

    User Manuals

    Description
    Filesize
    Language / Country
    MAN Operating Instructions Type 8045 | Insertion electromagnetic flowmeter 817.3 kB EN / EU
    MAN Operating Instructions Type S020 | Insertion fitting 1.6 MB EN,FR,DE / EU
    MAN Quickstart Type 8045 | Insertion electromagnetic flowmeter 474.3 kB EN / EU
    MAN Service manual Type 8045 | Spare parts 461.6 kB EN,FR,DE / EU
    MAN Bedienungsanleitung Typ 8045 | Magnetisch-induktiver Insertion-Durchflussmesser 822.6 kB DE / EU
    MAN Manual de usuario Tipo 8045 |Caudalímetro magnético inductivo 5.9 MB ES / ES
    MAN Manuel d?utilisation Type 8045 | Débitmétre électromagnétique à Insertion 833.6 kB FR / EU
    MAN Quickstart Typ 8045 | Magnetisch-induktiver Insertion-Durchflussmesser 481.1 kB DE / EU
    MAN Quickstart Type 8045 | Débitmétre électromagnétique à Insertion 477.4 kB FR / EU

    EU Declaration

    Description
    Filesize
    Language / Country
    ABD EU-DoC|EU Declaration 492.2 kB ML

    Interactive Animation

    Description
    Filesize
    Language / Country
    3D_ANIMATION 3D-Animation - 8045 3.3 MB DE
    3D_ANIMATION 3D-Animation - 8045 3.7 MB DE
    3D_ANIMATION 3D-Animation - 8045 3.3 MB EN
    3D_ANIMATION 3D-Animation - 8045 3.7 MB EN

    Flyers and Catalogues

    Description
    Filesize
    Language / Country
    MISC Electromagnetic Flowmeter Insertion Model. 632.4 kB EN / EU
    Position
    Item No.
    Description
    01 553189
    02 449755 Cable connector M20 x 1,5 black
    03 619205 Ring for fitting
    04 619204 Union nut f. 1510-1560 transmitter
    05 552111 Set: gasket 34,59X2,62 - 1 EPDM, 1 FKM

    My Comparison List