Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
We make ideas flow.
We make ideas flow.

    Digital electropneumatic Process Controller SideControl

    Type 8793 / Ident No. 226852

    Produkt-Foto Typ 8793

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 8793
    • Produkt-Foto Typ 8793
    • Massbild
    • Massbild
    • Massbild
    • Massbild
    • Massbild

    Process controller SideControl NAMUR

    • Compact and robust design
    • Easy Start-up using Tune function of the Positioner and Process controller
    • Integrated diagnostic functions for valve monitoring (optional)
    • Dynamic positioning system with no air consumption in controlled state
    • PROFIBUS DP-V1 or DeviceNet (optional)

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Product description

    The robust and compact process controller is designed to standardisation acc. to IEC 534-6 or VDI/VDE 3845 for assembly with linear and rotary actuators. In addition, the remote version can be combined with Bürkert process control valves. The digital electropneumatic SideControl process controller can be operated by the usual current and voltage standard signals and can also be equipped with the fieldbus interface PROFIBUS DP-V1 or DeviceNet. The actual process value is directly supplied to the device as 4-20 mA, PT100 or as frequency signal. The process controller calculates the position setpoint for the subordinated positioner through the variance comparison. Due to the analogue feedback all analogue values on the controlling level can be transferred. The parameterization of process controller and positioner can be carried out automatically. The process controller is equipped with additional diagnostic functions to monitor the state of the valve. Through status signals, valve diagnostic messages are transmitted according to NAMUR NE 107 recommendations and recorded as history. With the diagnosis, the operating conditions of the control valve can be monitored. This allows planned maintenance and optimises plant availability. The easy handling and the selection of additional software functions are done either on a graphic display with backlight and keypad or via PC interface. Operation occurs via external operation and display module consisting of a backlit graphical display and a robust transparency keyboard with for keys with software driven function indication. For the user operation is very simple and clear, identical to the Bürkert positioner or process controller TopControl, Type 8692/8693. The pilot valve system can be used equally for single and double acting actuators. It is characterised by a defined safety feature in case of failure of the electrical or power supply and possesses an enormous air capacity range with pressure supply up to 7 bar.

    Commodity Codes

    Technical attributes

    Type 8793
    Function Process Controller
    Valve function manual actuation No
    Pneumatic function 1 double acting Yes
    Pneumatic function 1 single acting Yes
    QNn value (gas) 100 l/min
    Temperature environment min 0 °C
    Temperature environment max 60 °C
    Displacement transducer type Internal rotative
    Displacement transducer signal Potentiometer
    Positioning system with booster function No
    For Actuator size 40 mm No
    For Actuator size 50mm No
    For Actuator size 63mm No
    For Actuator size 70mm No
    For Actuator size 80mm No
    For Actuator size 90mm No
    For Actuator size 100mm No
    For Actuator size 125mm Yes
    For Actuator size 130mm Yes
    For Actuator size 175mm Yes
    For Actuator size 225mm Yes
    Port connection 1 type Inner thread
    Port connection 1 thread type G
    Port connection 1 thread marking 1/4
    Port connection 2 type Inner thread
    Port connection 2 thread type G
    Port connection 2 thread marking 1/4
    Port connection 3 type Inner thread
    Port connection 3 pre-mounted Blind plug
    Port connection 3 thread type G
    Port connection 3 thread marking 1/4
    Electrical connection sort Screw terminal with cable feed-through
    Voltage / rated voltage 24 V
    Voltage / rated voltage 24 V
    Supply system-internal No
    Supply via BUS No
    Supply via separating barrier No
    AC voltage No
    DC voltage Yes
    Input 1 type analog voltage 0-5/10
    Input 1 type analog current 0/4-20
    Input 2 type digital transistor connection NPN No
    Input 2 type digital transistor connection PNP Yes
    Output 1 type analog current 0/4-20 mA
    Output 1 type analog voltage 0-5/10 V
    Output 2 digital transistor connection NPN No
    Output 2 digital transistor connection PNP Yes
    Output 3 digital transistor connection NPN No
    Output 3 digital transistor connection PNP Yes
    Control interface Keyboard and display internal
    Mounting type NAMUR / IEC 534 - 6 / VDI/VDE 3845
    Protection type (IP max. with suitable connector) 65/67
    Weight 1,850000 kg
    Weight 1,850000 kg
    Approval type ,
    Certification type ,
    Show full table Collapse table


    Data Sheets

    Language / Country
    DTS 8681, 869x, 879x Install Kits 4.3 MB EN / EU
    DTS Process Controller SideControl 1.1 MB EN / EU
    DTS 8681, 869x, 879x Adaptionen 4.3 MB DE / DE
    DTS Controlador Proceso Side Cont 4.1 MB ES / ES
    DTS Prozessregler SideControl 1.1 MB DE / DE

    User Manuals

    Language / Country
    MAN Additional Instruct.EX 8791-93 504.1 kB EN / EU
    MAN Config. PROFIBUS by GSD-file 4.3 MB EN,FR,DE / EU
    MAN Electropneumatic positioner 4.4 MB EN / EU
    MAN Konfig.- und Parametrier Tool 10.8 MB EN,FR,DE / EU
    MAN Option Ext. position feedback 1.1 MB EN,FR,DE / EU
    MAN Quickstart 8792-8793 1.4 MB EN / EU
    MAN Software Communicator 1.3 MB EN / EU
    MAN USB-Interface 2.2 MB EN,FR,DE / EU
    MAN Bedienungsanleitung 8792, 8793 4.1 MB DE / DE
    MAN Instruct.supplément.EX 8791-93 550.8 kB FR / FR
    MAN Positionneur èlectropneum. 4.6 MB FR / FR
    MAN Quickstart 8792-8793 1.4 MB DE / DE
    MAN Quickstart 8792-8793 1.4 MB FR / FR
    MAN Software Communicator 1.3 MB DE / DE
    MAN Software Communicator 1.4 MB FR / FR
    MAN Zusatzanleitung EX 8791-8793 500.9 kB DE / DE


    Language / Country
    SOW Buerkert Communicator 3.1.1 172.4 MB ML
    SOW Init Files EDS GSD EDD A.04 34.2 kB ML
    SOW PACTWARE4_1 SP1_.NET2_DTM Coll 4.1 252.4 MB ML / AF
    SOW PACTware 5.0 + DTM Collection 5.0 315.9 MB ML / AF
    SOW Positioner DTM Collection 1.0 13.8 MB ML

    EU Declaration

    Language / Country
    ABD EU-DoC|EU Declaration 1.7 MB EN,FR,DE

    Flyers and Catalogues

    Language / Country
    MISC 214.3 kB EN / EU