Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

Membrane Filtration

Membrane filtration is a state of the art treatment process utilising minimal maintenance requirements and no chemical addition. From Microfiltration to Ultrafiltration, from Nano filtration to Reverse Osmosis, Membrane Filtration is a commonly used water treatment technology. Whether you are treating wastewater, raw water or drinking water, your main focus is on consistent and reliable effluent quality. From demanding liquid separation to high purification, from particle to bacterial filtration, cost-effective and sustainable solutions are key.

The implementation of membrane filtration can have many purposes, media separation, particle or ion filtration, desalination and reuse applications. It’s also one of the best available technologies for desalination by the removal of suspended and dissolved particles. With quality Bürkert components and systems, your high performance and high value membrane filtration system is complete. We will work together with you to optimise your filtration system with the right sensors, valves, pneumatic components and membranes - including capillary, tubular and spiral wound types.

Typical Products used in Membrane Filtration:

Inline Paddle Wheel Flowsensor

Inline Paddle Wheel Flowsensor

Type 8030

  • Economic integration in pipe systems without any additional piping
  • 3-wire frequency pulse version to directly interface with PLC’s (both PNP and NPN)
  • Connection to Bürkert devices in remote versions
Get more information

Inline Paddle Wheel Flowmeter

Inline Paddle Wheel Flowmeter

Type 8032

  • Indication, monitoring, transmitting and On/Off control in one device
  • Programmable outputs (transistor or relay)
  • Automatic-calibration: Teach-In
  • Communication - external setpoints and process value (4-20 mA)
Get more information

Full bore magmeter

Full bore magmeter

Type 8055

  • Combination of magflowsensor fitting S054 or S055 and electronics SE56
  • Continuous measurement or Batch Control
  • Version without (S054) or with (S055) flanges
  • For water treatment and general purpose applications
Get more information

Pressure Transmitter

Pressure Transmitter

Type 8323

  • Piezoresistive or thin film sensor element
  • Available with flush diaphragm standard or acc. to EHEDG
  • Housing and wetted parts in corrosion-resistant stainless steel
  • Standard signal 4...20 mA for connection to automation-systems
  • Plug for quick installation and service
Get more information

Pressure Transmitter - OEM

Pressure Transmitter - OEM

Get more information

Pressure Transmitter / Switch

Pressure Transmitter / Switch

Type 8311

  • Indication, monitoring, transmitting and continuous or On/Off control in one device
  • Output signal 4...20 mA, 2-wire for continuous control
  • Transistor or relay outputs for On/Off control or alarm function
Get more information

Conductivity sensor

Conductivity sensor

Type 8220

  • Compact version for DN15 to DN200
  • Large capabilities of conductivity measurement through different cells
  • Large range of process connections with various fittings
Get more information

Conductivity meter

Conductivity meter

Type 8222

  • Perfect for clean water and slightly concentrated liquids
  • Integral device for direct connection to PLC
  • Simulation of process values for diagnostics
  • Three cell constants to cover a wide application range e.g. reverse osmosis
Get more information

pH/ORP meter

pH/ORP meter

Type 8202

  • Integral compact measurement device for direct connection to control level (PLC)
  • Thanks to the modular HMI, parameterization, calibration, transferring of parameterization data easily possible
  • Usage of 120 mm standard PG13,5 pH/ORP-probes with S8 connector (Type 8203 recommended)
  • Simulation of process value and diagnostic function
Get more information

Vibrating level switch

Vibrating level switch

Type 8110

  • For universal use as overfill or dry run protection system
  • Setup without adjustment
  • Smallest mounting dimensions
Get more information

Vibrating level switch; for food and beverage

Vibrating level switch; for food and beverage

Type 8111

  • For universal use as overfill or dry run protection system
  • Setup without adjustment
  • For food and beverage industry thanks to surface finishing < 0.8 μm
  • ATEX approvals
Get more information

Ultrasonic Level measurement device

Ultrasonic Level measurement device

Type 8177

  • Compact for level measurement up to 8 m
  • 4...20 mA/Hart - 2 wires
  • Suitable for solids
  • ATEX approvals
Get more information

Unable to display product type with the given sku.

Digital electropneumatic Positioner SideControl

Digital electropneumatic Positioner SideControl

Type 8792

  • Compact and robust design
  • Easy to start using Tune function
  • Integrated diagnostic functions for valve monitoring (optional)
  • Dynamic positioning system with no air consumption in controlled state
  • Profibus DPV1 or DeviceNet (optional)
Get more information

Servo-assisted 5/2, 5/3  or 3/2 way Solenoid Valve for pneumatics

Servo-assisted 5/2, 5/3 or 3/2 way Solenoid Valve for pneumatics

Type 6519

  • High flow-rate capacity
  • Reduced power consumption
  • Single or manifold mounting
  • Standard-, EEx m and EEx i versions
  • Threaded port G 1/4” or NAMUR flange
Get more information

Pneumatically operated 2/2 way Angle-Seat Valve

Pneumatically operated 2/2 way Angle-Seat Valve

Type 2000

  • Stainless steel or gunmetal housing with sleeve, clamped or welded connection
  • Long service life
  • High flow rate
  • Robust actuators with modular accessory program
Get more information

Direct-acting 3/2 way plunger valve

Direct-acting 3/2 way plunger valve

Type 6012

  • Direct-acting, compact small-format valve with diameter of up to DN 1.6
  • Vibration-proof, bolted coil system
  • Banjo threaded connection for direct mounting on pneumatic valves
  • Simple and quick push-in, flange, or manifold installation
  • Service-friendly manual override
Get more information

Remote Process Actuation Control System AirLINE

Remote Process Actuation Control System AirLINE

Type 8644

  • Innovative fieldbus interface
  • Combination of Fieldbus, pilot valves and I/O modules
  • High flexibility
  • Compact design
  • High flow rate
Get more information

Servo-assisted 2/2 way diaphragm valve

Servo-assisted 2/2 way diaphragm valve

Type 0142

  • Servo-assisted diaphragm with diameter of up to DN 63
  • Plastic valve for aggressive and contaminated media
  • Media-separated, metal-free version
  • Service-friendly manual override
  • Switching reliability with feedback function
Get more information

multiCELL - Multi-channel, Multi-function Transmitter / Controller

multiCELL - Multi-channel, Multi-function Transmitter / Controller

Type 8619

  • Compatible with most common flow, pH/ORP, chlorine and conductivity sensors
  • Simple, intuitive user interface supported by a large adjustable backlit display (4 user defined views)
  • Basic transmitter/controller with hardware extension possibilities (up to 6 free slots)
  • Functionality extendable by software options
Get more information

Customized Pneumatic Systems Solutions for the Processing Industries

Customized Pneumatic Systems Solutions for the Processing Industries

Type 8640

  • Compact design
  • Modular configuration
  • Higher fl exibility in control cabinet due to AirLINE Quick
  • Simple exchange of valves (with option “P-shut-off” – also possible during operation)
Get more information