Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
bürkert
We make ideas flow.

Boiler Feed Water

Efficiency and stability are essential when it comes to your boiler system. Thermal efficiency is increased with the reduction of blowdown requirements. Steady and high feed water temperature supports efficiency and reduces boiler energy consumption by maximising the use of condensate return. To maximise the life cycle of your boiler while reducing maintenance requirements, it is crucial to remove dissolved oxygen in the water before supplying the boiler, preventing corrosion in boiler and steam system.

Application Boiler Feed Water

Bürkert has a long history in steam systems, and at the heart of all of these systems is the boiler. We provide solutions that reduce downtime, increase efficiency and keep you safe. Our boiler water equipment controls the injection of chemical inhibitors and oxygen scavengers. We control scale and corrosion and make sure your system operates 24 hours per day, 7 days per week.

We monitor and control conductivity, pH, dosing pumps, feed water flow and blowdown.

Typical Products used in Boiler Feed Water:

Conductivity meter

Conductivity meter

Type 8222

  • Perfect for clean water and slightly concentrated liquids
  • Integral device for direct connection to PLC
  • Simulation of process values for diagnostics
  • Three cell constants to cover a wide application range e.g. reverse osmosis
Get more information

Inductive Conductivity Transmitter with Display

Inductive Conductivity Transmitter with Display

Type 8226

  • Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...)
  • PEEK/PPA version for CIP applications
  • Large range of process connections with various fittings
  • Multi language, menu-guided operation
Get more information

pH/ORP meter

pH/ORP meter

Type 8202

  • Integral compact measurement device for direct connection to control level (PLC)
  • Thanks to the modular HMI, parameterization, calibration, transferring of parameterization data easily possible
  • Usage of 120 mm standard PG13,5 pH/ORP-probes with S8 connector (Type 8203 recommended)
  • Simulation of process value and diagnostic function
Get more information

Inline Paddle Wheel Flowmeter / batch control

Inline Paddle Wheel Flowmeter / batch control

Type 8035

  • Compact version for DN06 to DN65
  • Displays both flow rate and volume (with two totalizers)
  • Automatic calibration: TEACH-IN
  • Simulation: all output signals provided without the need for real flow
Get more information

Insertion - magmeter

Insertion - magmeter

Type 8045

  • Sensor in solid state technology
  • Shows both flow rate and volume
  • Simulation: all output signals provided without the need for real flow
  • Clean in place (CIP), FDA approved
  • Version with Alloy C22 electrodes
Get more information

mxCONTROL Multifunction Controller

mxCONTROL Multifunction Controller

Type 8620

  • Data and event logging
  • One controller hardware with dozens of configuration possibilities quickly downloaded via SD card (supplied) or via USB interface
  • Ethernet or modem communication with email or call event notification & numerous input/output control signals
Get more information

multiCELL - Multi-channel, Multi-function Transmitter / Controller

multiCELL - Multi-channel, Multi-function Transmitter / Controller

Type 8619

  • Compatible with most common flow, pH/ORP and conductivity sensors
  • Simple, intuitive user interface supported by a large adjustable backlit display (4 user defined views)
  • Basic transmitter/controller with hardware extension possibilities (up to 6 free slots)
  • Functionality extendable by software options
Get more information

Inline Paddle Wheel Flowmeter / batch control

Inline Paddle Wheel Flowmeter / batch control

Type 8035

  • Compact version for DN06 to DN65
  • Displays both flow rate and volume (with two totalizers)
  • Automatic calibration: TEACH-IN
  • Simulation: all output signals provided without the need for real flow
Get more information

Servo-assisted  2/2 way diaphragm valve

Servo-assisted 2/2 way diaphragm valve

Type 6213

  • Servo-assisted diaphragm with diameter of up to DN 40
  • Spring coupled diaphragm opens without differential pressure
  • Vibration-proof, screwed coil system
  • Damped design for quiet closing
  • Press mould housing with high surface quality
Get more information

Servo-assisted 2/2 way diaphragm valve

Servo-assisted 2/2 way diaphragm valve

Type 5282

  • Servo-assisted diaphragm valve with diameter of up to DN 50
  • Separating diaphragm for aggressive and contaminated media
  • Closing and opening times can be individually adjusted
  • Moulded housing with high surface quality
  • Service-friendly manual override
Get more information

Digital electropneumatic Positioner for the integrated mounting on process control valves

Digital electropneumatic Positioner for the integrated mounting on process control valves

Type 8692

  • Compact, robust stainless Steel design
  • Easy start-up by automatic X-Tune function
  • Contact-free position sensor
  • Integrated control air routing with spring chamber aeration
  • Profibus DPV1 or DeviceNet communication (option)
Get more information

Digital electropneumatic Process Controller for the integrated mounting on process control valves

Digital electropneumatic Process Controller for the integrated mounting on process control valves

Type 8693

  • Compact, robust stainless Steel design
  • Easy start-up by Tune fuction for position and process controller
  • Contact-free position sensor
  • Integrated control air routing with spring chamber aeration
  • Profibus DPV1 or DeviceNet communication (option)
Get more information

Digital electropneumatic Positioner for the integrated mounting on process control valves

Digital electropneumatic Positioner for the integrated mounting on process control valves

Type 8696

  • Compact, robust stainless Steel design
  • Start-up by automatic Tune function
  • Contact-free position sensor
  • Integrated control air routing
  • Analoge Feedback (option)
Get more information

Digital electropneumatic Positioner SideControl

Digital electropneumatic Positioner SideControl

Type 8792

  • Compact and robust design
  • Easy to start using Tune function
  • Integrated diagnostic functions for valve monitoring (optional)
  • Dynamic positioning system with no air consumption in controlled state
  • Profibus DPV1 or DeviceNet (optional)
Get more information

Digital electropneumatic Process Controller SideControl

Digital electropneumatic Process Controller SideControl

Type 8793

  • Compact and robust design
  • Easy Start-up using Tune function of the Positioner and Process controller
  • Integrated diagnostic functions for valve monitoring (optional)
  • Dynamic positioning system with no air consumption in controlled state
  • Profibus DPV1 or DeviceNet (optional)
Get more information

Pneumatically operated 2/2 way Angle-Seat Valve

Pneumatically operated 2/2 way Angle-Seat Valve

Type 2000

  • Stainless steel or gunmetal housing with sleeve, clamped or welded connection
  • Long service life
  • High flow rate
  • Robust actuators with modular accessory program
Get more information

Pneumatically operated 2/2 way Angle-Seat Valve ELEMENT

Pneumatically operated 2/2 way Angle-Seat Valve ELEMENT

Type 2100

  • High flow rate
  • Long service life
  • Easy integration of automation units with ELEMENT
  • Flow-optimized stainless steel housing with threaded, clamp or weld connection
  • Suitable for 10 bar(g) steam
Get more information

Pneumatically operated 2-way Globe Control Valve

Pneumatically operated 2-way Globe Control Valve

Type 2712

  • Excellent control characteristics with compact housing
  • High life ycle and variability by removable trim kits
  • Robust actuator with modular accessory program
  • Stainless steel housing with flange, thread or weld end connection
  • High operative safety
Get more information

Pneumatically operated 2-way Globe Control Valve ELEMENT

Pneumatically operated 2-way Globe Control Valve ELEMENT

Type 2301

  • Excellent control characteristics
  • High cycle life and maintenance-free operation
  • Flow optimised body in stainless steel
  • Several Kvs value per port size due to removable trim kit
  • Control units can be mounted directly without external tubing
Get more information

Pneumatically operated 2-way Angle Seat Control Valve

Pneumatically operated 2-way Angle Seat Control Valve

Type 2702

  • Excellent control characteristics and high flow rates
  • Long service life
  • Robust actuators with modular accessory program
  • Stainless steel housing with thread and weld end connections
Get more information

Pneumatically operated 2/2 way Globe Valve ELEMENT

Pneumatically operated 2/2 way Globe Valve ELEMENT

Type 2101

  • Compact design
  • Long service life
  • Easy integration of automation units with ELEMENT
  • Stainless steel housing with threaded, clamp or weld connection
  • Suitable for 10 bar(g) steam
Get more information

Pneumatically operated 2/2 way Globe Valve

Pneumatically operated 2/2 way Globe Valve

Type 2012

  • Compact
  • Long service life
  • Robust actuators with modular accessory program
  • Stainless steel housing with flange, thread and weld end connection
Get more information

Pneumatic Control Unit for the integrated mounting on process valves

Pneumatic Control Unit for the integrated mounting on process valves

Type 8690

  • Compact Design
  • Integrated pilot valve with manual override
  • Integrated control air routing
  • Visual position indicator
  • With ATEX II cat. 3G/D and cat. 2D/G approval
Get more information

Control Head for the integrated mounting on process valves

Control Head for the integrated mounting on process valves

Type 8691

  • Contact-free inductive valve position registration(Teach function)
  • Coloured illuminated status display
  • Integrated control air routing
  • Fieldbus AS-Interface or DeviceNet (option)
  • With ATEX II cat. 3G/D approval
Get more information

Control Head for the integrated mounting on process valves

Control Head for the integrated mounting on process valves

Type 8695

  • Contact-free inductive valve position registration (Teach function)
  • Coloured illuminated status display
  • Integrated control air routing
  • Fieldbus AS-Interface or DeviceNet (option)
  • With ATEX II cat. 3G/D approval
Get more information

Mass Flow Controller for Gases (MFC)

Mass Flow Controller for Gases (MFC)

Type 8711

  • Nominal flow ranges from 0.010 lN/min to 80 lN/min
  • High accuracy and repeatability
  • Very fast settling times
  • Optional: Fieldbus interface
Get more information

Remote Process Actuation Control System AirLINE

Remote Process Actuation Control System AirLINE

Type 8644

  • Innovative fieldbus interface
  • Combination of Fieldbus, pilot valves and I/O modules
  • High flexibility
  • Compact design
  • High flow rate
Get more information

Direct-acting 2/2 way standard solenoid control valve

Direct-acting 2/2 way standard solenoid control valve

Type 2873

  • Excellent range
  • Very good response
  • Compact valve design
  • Orifice sizes 0.8 ... 4 mm
  • Optional: Explosion-protected coil
Get more information

Mass Flow Controller for Gases (MFC)

Mass Flow Controller for Gases (MFC)

Type 8626

  • Nominal flow ranges from 20 lN/min up to 2500 lN/min
  • High accuracy and repeatability
  • Short settling times
  • Protection class IP65
  • Optional: Fieldbus interface
Get more information

2/2 or 3/2 way Flipper-Solenoid Valve with separating diaphragm

2/2 or 3/2 way Flipper-Solenoid Valve with separating diaphragm

Type 6650

  • Only 4.5mm wide
  • Medium isolation, for aggressive fluids
  • Direct-acting
  • Vacuum up to 7 bar
  • Short response times
Get more information