Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
bürkert
We make ideas flow.

Filtration, Separation & Chromatography

Filtration and separation of identifiable and specific active drug ingredients requires our unlimited modularity to save you valuable plant space and offer you peace of mind from dead legs and cross-contamination.

Key Application

Obtain as much product yield as possible in the right place with the least amount of waste. This is the area where our combined engineering competence and process application understanding is fully utilised to deliver fast flow shifts, minimum dead space and reduced footprint.

“Downstream” is the home of the Robolux multiway / multiport diaphragm valve solution, extending the principle that the potential for highest possible return on investment is generated from this area of the plant.

Typical Products used in Filtration, Separation & Chromatography

Robolux Multiway Multiport Diaphragm Valve, Pneumatically operated

Robolux Multiway Multiport Diaphragm Valve, Pneumatically operated

Type 2036

  • Allows optimized processes designs
  • Reduced installation costs
  • Reduced number of valves and welds
  • Stainless steel bodies in different configurations
  • Approvals FDA, CE, USP VI, ATEX, 3.1
Get more information

Multifunction Bloc and Weld Solution

Multifunction Bloc and Weld Solution

Type 2034

  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Quality certifications FDA/3A
Get more information

Pneumatically operated 2/2 way Diaphragm Valve ELEMENT

Pneumatically operated 2/2 way Diaphragm Valve ELEMENT

Type 2103

  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Quality certifications FDA
Get more information

Pneumatically operated zero dead volume T-valve ELEMENT

Pneumatically operated zero dead volume T-valve ELEMENT

Get more information

Pneumatically operated Tank Bottom Valve ELEMENT

Pneumatically operated Tank Bottom Valve ELEMENT

Type 2105

  • Hermetical separation of fluids from the operating mechanism by diaphragm
  • Quality certifications FDA/3A
Get more information

Control- and Feedback Head for integrated mounting on Robolux valves Type 2036

Control- and Feedback Head for integrated mounting on Robolux valves Type 2036

Type 8686

  • Compact stainless steel design
  • Contactless valve position registration
  • Coloured illuminated status display
  • Fieldbus AS-Interface (optional)
  • Version for ATEX / IECEx
Get more information

Control Head for the integrated mounting on process valves

Control Head for the integrated mounting on process valves

Type 8691

  • Contact-free inductive valve position registration(Teach function)
  • Coloured illuminated status display
  • Integrated control air routing
  • Fieldbus AS-Interface or DeviceNet (option)
  • With ATEX II cat. 3G/D approval
Get more information

Control Head for the integrated mounting on process valves

Control Head for the integrated mounting on process valves

Type 8695

  • Contact-free inductive valve position registration (Teach function)
  • Coloured illuminated status display
  • Integrated control air routing
  • Fieldbus AS-Interface or DeviceNet (option)
  • With ATEX II cat. 3G/D approval
Get more information

Digital electropneumatic Positioner for the integrated mounting on process control valves

Digital electropneumatic Positioner for the integrated mounting on process control valves

Type 8692

  • Compact, robust stainless Steel design
  • Easy start-up by automatic X-Tune function
  • Contact-free position sensor
  • Integrated control air routing with spring chamber aeration
  • Profibus DPV1 or DeviceNet communication (option)
Get more information

Digital electropneumatic Positioner for the integrated mounting on process control valves

Digital electropneumatic Positioner for the integrated mounting on process control valves

Type 8696

  • Compact, robust stainless Steel design
  • Start-up by automatic Tune function
  • Contact-free position sensor
  • Integrated control air routing
  • Analoge Feedback (option)
Get more information

Digital electropneumatic Process Controller for the integrated mounting on process control valves

Digital electropneumatic Process Controller for the integrated mounting on process control valves

Type 8693

  • Compact, robust stainless Steel design
  • Easy start-up by Tune fuction for position and process controller
  • Contact-free position sensor
  • Integrated control air routing with spring chamber aeration
  • Profibus DPV1 or DeviceNet communication (option)
Get more information

Customized Pneumatic Systems Solutions for the Processing Industries

Customized Pneumatic Systems Solutions for the Processing Industries

Type 8640

  • Compact design
  • Modular configuration
  • Higher fl exibility in control cabinet due to AirLINE Quick
  • Simple exchange of valves (with option “P-shut-off” – also possible during operation)
Get more information

Remote Process Actuation Control System AirLINE

Remote Process Actuation Control System AirLINE

Type 8644

  • Innovative fieldbus interface
  • Combination of Fieldbus, pilot valves and I/O modules
  • High flexibility
  • Compact design
  • High flow rate
Get more information

Full bore magmeter, hygienic process connections

Full bore magmeter, hygienic process connections

Type 8056

  • Combination of magflowsensor fitting S056 and electronics SE56
  • Continuous measurement or Batch Control
  • Sanitary version 3A certificate
  • Dedicated to food & beverage or pharmaceutical applications
Get more information

Radar Level measurement device for hygienic applications

Radar Level measurement device for hygienic applications

Type 8138

  • Compact for level measurement up to 20 m
  • 4 ... 20 mA/Hart - 2 wires
  • Adjustable with PC
  • ATEX approvals
  • Clamp, Varivent® process connection
Get more information

Unable to display product type with the given sku.

Conductivity sensor for hygienic applications

Conductivity sensor for hygienic applications

Type 8221

  • 4-electrode technology for extended measuring range 0.1 S...500 mS/cm
  • Process connections, materials, surface finish designed for use in hygienic applications
  • Suitable for steam sterilization, CIP (Clean in place)
Get more information

multiCELL - Multi-channel, Multi-function Transmitter / Controller

multiCELL - Multi-channel, Multi-function Transmitter / Controller

Type 8619

  • Compatible with most common flow, pH/ORP and conductivity sensors
  • Simple, intuitive user interface supported by a large adjustable backlit display (4 user defined views)
  • Basic transmitter/controller with hardware extension possibilities (up to 6 free slots)
  • Functionality extendable by software options
Get more information

Full bore magmeter, hygienic process connections

Full bore magmeter, hygienic process connections

Type 8056

  • Combination of magflowsensor fitting S056 and electronics SE56
  • Continuous measurement or Batch Control
  • Sanitary version 3A certificate
  • Dedicated to food & beverage or pharmaceutical applications
Get more information

Radar Level measurement device for hygienic applications

Radar Level measurement device for hygienic applications

Type 8138

  • Compact for level measurement up to 20 m
  • 4 ... 20 mA/Hart - 2 wires
  • Adjustable with PC
  • ATEX approvals
  • Clamp, Varivent® process connection
Get more information

pH Senor für hygienische Applikationen

pH Senor für hygienische Applikationen

Type 8201

  • Sterile design
  • Extremely robust and unbreakable construction
  • CIP-compatible, in-line sterilizable
  • Extremely long service life
  • Long calibration intervals
Get more information

Conductivity sensor for hygienic applications

Conductivity sensor for hygienic applications

Type 8221

  • 4-electrode technology for extended measuring range 0.1 S...500 mS/cm
  • Process connections, materials, surface finish designed for use in hygienic applications
  • Suitable for steam sterilization, CIP (Clean in place)
Get more information

multiCELL - Multi-channel, Multi-function Transmitter / Controller

multiCELL - Multi-channel, Multi-function Transmitter / Controller

Type 8619

  • Compatible with most common flow, pH/ORP and conductivity sensors
  • Simple, intuitive user interface supported by a large adjustable backlit display (4 user defined views)
  • Basic transmitter/controller with hardware extension possibilities (up to 6 free slots)
  • Functionality extendable by software options
Get more information