Bürkert - Close to you
Office /2
    • Main Office
      Burkert Middle East FZE
      Ras al Khaimah | United Arab Emirates

      Phone +971 7207 6696
      Fax +971 7207 6695
      E-Mail fnyrf.nr@ohexreg.pbz
    • Distributor
      Daly Fluid Technologies LLC – DFT
      Dubai | United Arab Emirates
      Phone +971 4887 8185
      Fax +971 4887 8184
      E-Mail fnyrf@qsgzr.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

Nitriding and Nitrocarbonising (Nitrocarburising)

To improve quality, material surfaces can be altered to display the correct hardness, conductivity, wear behaviour, friction or aesthetics. Parts for mobile phones, aircraft, glasses, displays, beverage bottles and cars can be modified with a range of technologies from PA-CVD and thermal spraying to PVD and powder coating. For these systems, Bürkert offers the complete spectrum of components and subsystems to handle a wide range of both gases and vacuum.

Application Nitriding Nitrocarbonising

Nitriding is a thermochemical treatment with which the surface zone of ferrous materials is enriched with nitrogen. Nitriding processes provide your material excellent corrosion defence and outstanding protection against wear while allowing the dynamic characteristics  of components made of ferrous materials to be improved. If at the same time carbon diffuses into the surface zone as a result of the addition of a carbon source to the nitriding medium, the process is called nitrocarburising. Both methods are used primarily for providing wear protection or your material.

Bürkert supports both nitriding and nitrocarbonising with high precision components, and we will work with you to create system solutions fit to your specifications.

Typical Products used in Nitriding and Nitrocarbonising (Nitrocarburising): 

Mass Flow Controller for Gases (MFC)

Mass Flow Controller for Gases (MFC)

Type 8711

  • Nominal flow ranges from 0.010 lN/min to 80 lN/min
  • High accuracy and repeatability
  • Very fast settling times
  • Optional: Fieldbus interface
Get more information

Mass Flow Controller for Gases (MFC)

Mass Flow Controller for Gases (MFC)

Type 8626

  • Nominal flow ranges from 20 lN/min up to 2500 lN/min
  • High accuracy and repeatability
  • Short settling times
  • Protection class IP65
  • Optional: Fieldbus interface
Get more information

Direct-acting 2-way standard solenoid control valve

Direct-acting 2-way standard solenoid control valve

Type 2873

  • Excellent range
  • Very good response
  • Compact valve design
  • Orifice sizes 0.8 ... 4 mm
  • Optional: Explosion-protected coil
Get more information

Mass Flow Controller for Gases (MFC)

Mass Flow Controller for Gases (MFC)

Type 8713

  • Nominal flow ranges from 0.010 lN/min to 80 lN/min
  • High accuracy and repeatability
  • Very fast settling times
  • Digital communication via RS485
  • Compact version
Get more information

Mass Flow Controller for Gases (MFC)

Mass Flow Controller for Gases (MFC)

Type 8710

  • Nominal flow ranges from 0.005 lN/min to 15 lN/min
  • High accuracy and repeatability
  • Applicable for aggressive gases
  • Optional: Fieldbus interface
Get more information

2/2- and 3/2-way Bürkert TwinPower Rocker-Solenoid Valve with separating diaphragm

2/2- and 3/2-way Bürkert TwinPower Rocker-Solenoid Valve with separating diaphragm

Type 6626

  • For highest chemical resistance requirements
  • Ultra compact design due to Bürkert Twinpower-actuatur with 16mm width
  • DN 2,0 (3bar) and DN 3,0 (2bar)
  • Integrated hit and hold electronic
  • High back pressure tightness with excellent cleanability
Get more information

2/2 or 3/2 way TwinPower Rocker-Solenoid Valve with separating diaphragm

2/2 or 3/2 way TwinPower Rocker-Solenoid Valve with separating diaphragm

Type 6628

  • 22 mm ultra compact design with orifices up to DN 3.0
  • Isolating diaphragm for high chemical resistance
  • Circuit function NC, NO and 3-way universal
  • Back pressure tightness via rocker principle
  • Minimal internal volume with excellent cleanability
Get more information

Direct-acting 2/2 or 3/2 way pivoted armature valve

Direct-acting 2/2 or 3/2 way pivoted armature valve

Type 0330

  • Direct-acting, media-separated valve with diameter of up to DN 5
  • Maintenance-free pivoted armature technology
  • Vibration-proof, block screwed coil system
  • Suitable for aggressive alkaline and acidic solutions
  • Service-friendly, robust manual operation
Get more information

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Type 8741

  • Nominal flow ranges from 0.010 lN/min to 80 lN/min
  • High accuracy and repeatability
  • Very fast response times
  • Communication via fieldbus based on CANopen
Get more information

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Type 8741

  • Nominal flow ranges from 0.010 lN/min to 80 lN/min
  • High accuracy and repeatability
  • Very fast response times
  • Communication via fieldbus based on CANopen
Get more information